| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10162022
Manufacturer Communication Number: SA-010-19
Summary
2019 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED FEATURES: The new 2019 Mazda3 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. PDI fuse, Front Wiper Service Caution, i-ACTIVSENSE Switch, Traffic Sign Recognition (TSR), MAZDA CONNECT Power Function, MAZDA CONNECT Center Display View, In-Vehicle Digital Owner’s Manual, Navigation System, SIRIUSXM Data Service, Power Door Locks, Auxiliary Key, Transmitter Battery Saving Function, Keyless Entry Using Auxiliary Key, Rear Door Child Safety Locks Operation, Link Seat & Climate Control Temperatures, Seat Warmer Turns OFF, Electric Parking Brake (EPB), A/C Air Temperature Is Not Cold, Tire Pressure Monitoring System (TPMS), Condition Based Maintenance, M-MDS (MDARS) &, Part Replacement.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| MAZDA | MAZDA3 | 2019 |
[hide]
Service Alert Mazda North American Operations
Irvine, CA 92618-2922
Page 1 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Subject:
Service Alert No.: SA-010/19
2019 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED
FEATURES
Last Issued: 06/13/2019
BULLETIN NOTES
This Service Alert supersedes the previously issued Service Alert(s) listed below: The changes are noted in
Red.
Previous Service
Alert(s): Date(s) Issued:
SA-010/19 06/07/19, 05/09/19,05/02/19, 04/25/19,04/11/19, 03/29/19, 03/21/19,
03/15/19,03/08/19, 03/06/19, 03/05/19, 02/25/19
APPLICABLE MODEL(S)/VINS
2019 Mazda3
DESCRIPTION
The new 2019 Mazda3 has new and revised features that are different from previous models, and may be
difficult to understand. This Service Alert provides valuable information to support potential dealer and
customer concerns.
Index
PDI fuse
Front Wiper Service Caution
i-ACTIVSENSE Switch
Traffic Sign Recognition (TSR)
MAZDA CONNECT Power Function
MAZDA CONNECT Center Display View
In-Vehicle Digital Owner’s Manual
Navigation System
SIRIUSXM Data Service
Power Door Locks
Auxiliary Key
Transmitter Battery Saving Function
Keyless Entry Using Auxiliary Key
Rear Door Child Safety Locks Operation
Link Seat & Climate Control Temperatures
Seat Warmer Turns OFF
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 2 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Electric Parking Brake (EPB)
A/C Air Temperature Is Not Cold
Tire Pressure Monitoring System (TPMS)
Condition Based Maintenance
M-MDS (MDARS)
Part Replacement
Item Service Information
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 3 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Fuse to be Installed at PDI (JM1 = Japan built)
1. There is only one fuse removed at the factory that should be
installed at PDI. It is fuse F27 (25A). The fuse is stored in the lid of
the fuse box with the spare fuses.
2. The current PDI form is wrong. It states there are two (2) fuses
removed (F46 and F50) that should be installed. The form is being
updated with this change.
Fuse Block
(Engine Compartment)
Fuse Block
(Left Side)
Fuse to be Installed at PDI (3MZ = Mexico built)
1. There are two fuses removed at the factory that should be
installed at PDI. They are fuse F27 (25A) and F15 (15A).
2. NOTE: On some vehicles, fuse F13 (15A) is being removed
instead of F15 at the factory. This causes the Commander switch
to be inoperative.
3. The F27 (25A) fuse is stored in the lid of the fuse box with the
spare fuses.
4. The F15 (15A) fuse is stored in the lower panel compartment on
the left side of the steering wheel.
5. Go to SA-017/19 for details.
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 4 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Front Wiper Service Caution
1. Wiper arm park position is located under the hood.
2. When servicing front wipers, front wiper service mode is required
or damage to wiper arms may occur (see Service Information).
3. If wiper arms are replaced, M-MDS is needed for wiper arm
adjustment (see Service Information)
4. DO NOT use wiper arms as markers when in dealer inventory.
See Owner’s Manual ->
Maintenance and Care >
Replacing Windshield Wiper
Blades
MGSS: WINDSHIELD WIPER ARM
AND BLADE ADJUSTMENT
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 5 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
i-ACTIVSENSE Switch (New)
When iACTIVSENSE
is in normal
operating
status, the
instrument
cluster iACTIVSENSE
indicator is
green.
Activated Status: Green
When iACTIVSENSE
has an
environmen
tal fault,
such as a
dirty
windshield
or driving
into the
sun, the
instrument
cluster iACTIVSENSE
Stand-by Status: White
See Owner’s Manual -> When
Driving -> i-ACTIVSENSE -> iACTIVSENSE
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 6 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
indicator is
white.
When iACTIVSENSE
has a fault
that needs
diagnosis by
a
dealership,
the
instrument
cluster iACTIVSENSE
indicator is
amber.
Warning Status: Amber
When the iACTIVSENSE
switch is
pressed and
released
immediately
, the
following
systems are
canceled.
1. Lane
Departu
re
Warning
System
(LDWS)
2. Blind
Spot
Monitor
ing
(BSM)
3. Distanc
e Speed
Partially Cancelled Status:
INDICATOR IS TURNED OFF
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 7 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Alert
(DSA)
4. Rear
Cross
Traffic
Alert
(RCTA)
5. Lanekeep
Assist
System
(LAS)
To turn the
system back
to
“Activated
Status” ,
press the iACTIVSENSE
switch once.
NOTE: If
MRCC is
used, the
system will
also return
to
“Activated
Status”.
When the iACTIVSENSE
switch is
pressed and
held, all
systems are
canceled.
1. Lane
Departu
re
Warning
System
(LDWS)
Fully Cancelled Status:
I-ACTIVSENSE INDICATOR IS OFF
SBS OFF WARNING LIGHT IS ON
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 8 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
2. Blind
Spot
Monitor
ing
(BSM)
3. Distanc
e Speed
Alert
(DSA)
4. Rear
Cross
Traffic
Alert
(RCTA)
5. Lanekeep
Assist
System
(LAS)
6. Smart
Brake
Support
(SBS)
7. Smart
Brake
Support
[Rear]
(SBS-R)
8. Smart
Brake
Support
[Rear
Crossing
] (SBS
RC)
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 9 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Traffic Sign Recognition (TSR) *
Note:
1. TSR function is only available with a dealer installed in-vehicle
navigation system accessory.
2. TSR function requires Forward Sensing Camera (FSC) recognition
or navigation SD card map data when the vehicle is driven.**
3. TSR function is not displayed in the Active Driving Display.
4. TSR function is disabled when Apple CarPlay™ or Android Auto™ is
connected.
* Some models
MAZDA CONNECT
Speed Limit Alert OFF
(Default Setting)
No Function
Driving under the speed limit
See Owner’s Manual -> When
Driving -> i-ACTIVSENSE -> iACTIVSENSE -> Traffic Sign
Recognition System (TSR)
MGSS: Traffic Sign Recognition
(TSR)
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 10 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Driving over the speed limit
Stop sign and Speed Limit recognized
Do Not Enter sign and Speed Limit
recognized
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 11 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
MAZDA CONNECT
Speed Limit Alert ON
(Customer Setting
Change)
Excessive Speed Warning
MAZDA CONNECT Speed Limit Alert Customer Settings
1. Speed Limit Alert Settings
1. OFF
2. Visual
3. Visual + Audible
2. Speed Limit Alert Threshold
1. 0 mph
2. +5 mph
3. +10 mph
** SD Card maps may contain information about the speed limits of
the roads. The navigation system is able to warn driver if they exceed
the current limit. This information may not be available in some areas
or may not be fully correct for all roads on the map.
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 12 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
MAZDA CONNECT New Power Off Function
1. Audio Mute – Short press the volume knob (Press again to cancel)
2. Power Off – Press and hold the volume knob (Press and hold again
to Power ON)
See Owner’s Manual ->
Interior Features -> Mazda
Connect
MGSS: ENTERTAINMENT SYSTEM
In-vehicle Owner’s Manual
installation
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 13 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
MAZDA CONNECT Center Display View
The rear-view monitor and Android Auto do not utilize all of the
center display space.
Function Display
MAZDA
CONNECT FM
Apple CarPlay
Android Auto
Rear View
Monitor
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 14 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
In-Vehicle Digital Owner’s Manual
The in-vehicle digital OM can be displayed on the center display while
the vehicle is stopped. Customer can search descriptions and watch
videos of vehicle features and functions by operating the commander
switch.
NOTE:
1. The digital owner’s manual must be installed during PDI. Due to
printing deadlines and later updates to the digital manual, the
content of the digital manual may differ from the printed manual.
2. USB memory flash drive FAT16 or FAT32 format is required for
installation.
3. The vehicle’s infotainment system will only accept file names
[contents.tar] and [contents.sig]. File names with additional
suffixes will not be accepted.
4. The infotainment system may inadvertently be powered OFF if the
diagnostic assist function buttons are not pressed correctly.
Simply press and hold the volume knob to power back ON.
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 15 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Navigation System
2019 Mazda3 is not equipped with factory installed navigation
system, however, it is available as a dealer installed accessory.
NOTE: The 2019 Mazda3 accessory navigation SD is made in
Japan instead of USA. If you use a made in the USA navigation
SD card (for 6th gen) in the 2019 Mazda3, it will not function.
—
SIRIUSXM Data Service No Free Trial (Preferred Package and above)
1. Only available as a paid subscription.
2. 2019 Mazda3 is not equipped with factory installed navigation
system, however, it is available as a dealer installed accessory.
3. SiriusXM Traffic Plus feature requires in-vehicle navigation SD
card.
See Owner’s Manual -> Interior
Features -> Mazda Connect ->
Appendix
SA-007/19 – SIRIUSXM DATA
SERVICES
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 16 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Power Door Locks
Doors Lock With Keys In The Vehicle When Liftgate Lock Switch Is
Pressed.
(Japan built) vehicles with VINs lower than JM1BP******1142789
(produced before May 28, 2019)
DO NOT leave keys in the vehicle. The doors will lock with keys in the
vehicle when liftgate lock switch is pressed and liftgate is closed, but
the liftgate will not lock in the above condition.
NOTE: This is currently under investigation.
Doors cannot be unlocked using the outside door handle touch sensor
The door handle touch sensor system may not operate normally
under the following conditions:
1. Front passenger (without key) grabs and holds the outside door
handle before the driver (with key) touches the drivers outside door
handle unlock touch sensor.
2. You touch the sensing area of the door lock touch sensor and the
sensing area of the door release touch sensor at the same time.
Good No Good
See Owner’s Manual ->
Before Driving -> Doors and Locks
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 17 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Auxiliary Key
The auxiliary keys need to be inserted into the transmitters during
PDI.
Auxiliary Key Transmitter
NOTE: The auxiliary keys are small and could be
overlooked during PDI.
Vehicles arrive at the dealer with Auxiliary Keys
located in the glove compartment*
Vehicles arrive at the dealer with Transmitters
located in the front cup holder*
* Vehicles that arrive at the dealer after business hours, transmitters/auxiliary keys are located in
the dealer’s early bird key drop box.
1. If one auxiliary key is lost, some key machines can trace cut a new
replacement key.
2. If both auxiliary keys are lost, key cutting machines do not
recognize vehicle key code and will not cut new replacement keys.
1. Mazda is aware of this issue and is working on a resolution.
Transmitter Note:
1. If one transmitter is lost, inform the customer to take cautions not
to lose the 2nd transmitter.
2. If both transmitters are lost, the vehicle will be disabled.
1. MDARS is not able to program transmitters at this time.
2. Mazda is aware of this issue and is working on a resolution.
See Owner’s Manual -> Before
Driving -> Keys-> Auxiliary key
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 18 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Insert the auxiliary key into the transmitter.
Remove the transmitter lower cover by sliding
the knob in the direction shown and then
sliding the cover in the opposite direction.
Insert the auxiliary key.
Install the transmitter lower cover by inserting
the tabs of the lower cover into the slots of the
transmitter.
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 19 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Transmitter Battery Saving Function (Key Fob)
The new 2019 Mazda3 has a “power saving” function built into the
keyless entry system where some key fob functions are disabled. This
feature could accidentally be enabled and some concerns with the
vehicle may be:
1. Engine does not start.
2. Engine does not start unless you hold the fob to the start/stop
button.
3. Doors do not unlock using the door handle, but unlock with the
remote.
4. Doors do not lock using the door handle, but lock with the
remote.
5. Transmitter indicator light does not turn on/flash.
Turning on the power saving
function
After you have turned on the
power saving function according
to the following procedure, the
hazard warning lights and sound
operate* one time.
1. Press the lock button on the
transmitter 4 times within 3
seconds to turn on the operation
indicator light.
2. Press the lock button
continuously for 1.5 seconds or
longer while the operation
indicator light turns on (for 5
seconds).
3. Press any of the buttons on the
transmitter to make sure that the
operation indicator light does not
turn on/flash.
Turning off the power saving
function
After you have turned off the
power saving function according
to the following procedure, the
hazard warning lights and sound
operate* one time.
1. Press any of the buttons on the
transmitter to make sure that the
operation indicator light does not
turn on/flash.
2. Press the lock button on the
transmitter 4 times within 3
seconds to turn on the operation
indicator light.
3. Press the lock button
continuously for 1.5 seconds or
longer while the operation
indicator light turns on (for 5
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 20 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
seconds).
*: with the advanced keyless
function
Also see Owner’s Manual ->
Before Driving -> Keys -> Power
saving function
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 21 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Keyless Entry Using Auxiliary Key
If the vehicle battery is discharged and/or the key battery is dead,
vehicle entry is possible using the auxilary key.
See Owner’s Manual ->
Before Driving -> Keys -> Auxiliary
Key
Then refer to Owner’s Manual ->
Before Driving -> Doors and Locks
-> Unlocking with Auxiliary Key
Rear Door Child Safety Locks Operation
The auxiliary key is required to enable (lock) and disable (unlock) the
rear door child safety locks.
1. Auxiliary Key
2. Lock
3. Unlock
See Owner’s Manual ->
Before Driving -> Doors and Locks
-> Rear Door Child Safety Locks
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 22 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Seat Warmer and Heated Steering Wheel Auto Mode
The driver and front passenger’s seater warmers* and the heated
steering wheel* can be set to be automatically controlled (turned on
and off) by the climate control system, depending on the set
temperature.
Auto Mode
1. Go to MAZDA CONNECT home screen and select “Settings”
2. Select “Vehicle Settings”.
3. Enable “Link Seat Climate Control Temperatures”.
4. Press the climate control AUTO switch.
Link Seat Climate Control Temperatures
Setting
Climate Control Auto
Switch
* if equipped
See Owner’s Manual ->
Essential Safety Equipment ->
Seat Warmer/Heated Steering
Wheel -> Seat Warmer / Heated
Steering Wheel
Seat Warmer Turns OFF in Manual Mode
JM1 (Japan built) vehicles produced before December 17, 2018
3MZ (Mexico built) vehicles produced before March 19, 2019
1. The front seat warmers turn OFF after approximately 10 minutes
in manual mode.
2. DTC B1030:13 (SEAT WARMER UNIT (LH) CIRCUIT MALFUNCTION
(HEATER SIDE)) is stored.
3. Front seat warmer functions after seat cool down and ignition OFF
-> ON cycle.
Contact Hotline for latest repair information.
—
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 23 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Seat Warmer Will Not Turn ON After Previous Usage
JM1 (Japan built) vehicles produced after December 17, 2018
3MZ (Mexico built) vehicles produced after March 19, 2019
1. DTC B1030:13 (SEAT WARMER UNIT (LH) CIRCUIT MALFUNCTION
(HEATER SIDE)) is stored.
2. Front seat warmer functions after seat cool down and ignition OFF
-> ON cycle.
Contact Hotline for latest repair information.
—
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 24 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Electric Parking Brake (EPB)
Parking Brake Auto Operation
When the ignition is switched OFF, the parking brake will be applied
automatically. The EPB indicator light in the instrument cluster and
the EPB switch indicator light turn ON.
1. Indicator light
Canceling the Parking Brake Auto Operation
Parking brake auto operation can be canceled using the procedure in
the Owner’s Manual.
NOTE: When the ignition is cycled back ON, the parking brake auto
operation is restored.
Parking Brake Automatic Release
If the accelerator pedal is depressed with the parking brake applied
and all of the following conditions are met, the parking brake is
automatically release. When the parking brake is released, the EPB
indicator light in the instrument cluster and the EPB switch indicator
light turn off.
A/T M/T
Engine is running
Driver’s door is closed
Driver’s seat belt is fastened
Selector lever is in the D, M, or R
position
Shift lever is in a position other than
neutral
Clutch pedal is depressed halfway
See Owner’s Manual -> When
Driving -> Brake -> EPB Auto
operation
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 25 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
A/C Air Temperature Is Not Cold
When diagnosing A/C performance complaints, use a thermometer as
shown below and only compare A/C performance to another vehicle
that is the same model/year/HVAC type*.
*HVAC Types:
1. FULL-AUTO AIR CONDITIONER
2. MANUAL AIR CONDITIONER
MGSS: REFRIGERANT SYSTEM
PERFORMANCE TEST [(US)]
Tire Pressure Monitoring System (TPMS) Change
The TPMS system uses a new rubber type direct TPMS.
NOTE: The new rubber type is not reusable. If the TPMS sensor is
removed from the wheel, it must be replaced.
New Rubber Type Old Metal Type
MGSS: TIRE PRESSURE
MONITORING SYSTEM (TPMS)
Service Alert No.: SA-010/19 Last Issued: 06/13/2019
Page 26 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Condition Based Maintenance (Except Canada)
The vehicle calculates the maintenance (oil change) timing.
1. This function cannot be turned OFF.
2. Distance until the oil change is available in MAZDA CONNECT.
3. Reset is required after every oil change.
MGSS: MAINTENANCE MONITOR
OPERATION PROCEDURE
New M-MDS (MDARS)
A new M-MDS diagnostic tester (MDARS) for 7th generation vehicles
(starting with the 2019 Mazda3) is used.
1. Performs more maintenance service functions
2. Performs more complicated vehicle electrical system diagnostic
3. Reprograms more ECU’s
MGSS: BASIC KNOWLEDGE
Parts Replacement
When replacing vehicle parts such as ECU’s, motors, seats….etc,
always refer to MGSS. Some new components may not operate if
MGSS new part replacement procedure is not performed.
—
[/hide]
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
https://www.nhtsa.gov/recalls?nhtsaId=10162022
https://static.nhtsa.gov/odi/tsbs/2019/MC-10162022-0001.pdf
Loading...
Reload document 
Open in new tab
- 【Wifi Upgrade】- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
- 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS, which offers solution to pinpoint troubles of your cars.
- 【7 Most Useful Reset Services】- The car scanner can provides 7 hot maintenance reset: Oil EPB SAS ETS TPMS ABS DF. These powerful reset functions will make your car safer and more reliable.
- 【5" Large HD Touchscreen】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer.
- 【4 in 1 Live Data Display】- The car scanner tool shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time. Test reports are easy to share and print.
- 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
- [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
- [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
- [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
- [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
- LAUNCH X431 PAD VII Elite,2024 Top Diagnostic Scanner: High-end ECU programming backup/restore for 30+ car brands scan tool, ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 60+ Reset, guided functions.
- Huge-Upgraded ECU Programming & Coding: Working on 30+ car brands:1) Backup/Restore data from original ECUs;2) Online Programming;3) R-etrofit;4) ECU Upgrade.Coding features:Recode ECU Data, Personalization and loads of more.
- UNMATCHED COVERAGE: Launch X431 PADVII diagnostic tool works on over 200 car brands, support 12/24V passenger cars and commercial vehicles;Secured Gateway Access (SGW). and J2534/D-PDU/RP1210 and CAN2.0/CAFD/DoIP protocols.
- TOP INTELLIGENT DIAGNOSTIC: LAUNCH X431 PADVII offer topology mapping overview all-systems status.Pin detection to detect pin volt, data rate.Guided functions,repair tips,DTC Analysis,Component Measurement,and Relevant Cases.
- [ Pin Detection & Guided Functions] LAUNCH X431 PAD VII scan tool with Guided Function (for V.A.G) allow on-screen prompts for proper diagnostic. Pin Detection allow detecting DLC pins voltage and access protocol types to troubleshoot your DLC port.
- 【PayAttention】The FULL Special Resets fit for Ford vehicles are in the related car systems, DON'T NEED TO BUY any Reset software fit for Ford brand at mall, as those software are prepared for other brands like G.M, B.MW, V.W, etc. You can find the reset in this way: Diagnose>Manual choose model and year>Automatically Search>System Selection>ECM/BCM/TCM/ABS/...>Special Functions, but features fit for Ford brand vary by car model and year.
- 【2024 All-In-One Bidirectional Scanner Fit For Ford Lincoln Mercury Mazda】Launch Creader Elite Scanner fit for Ford can read/ erase codes, view live data text & graphing, retrieve ECU version information and support full OE-LEVEL features, helps you identify & solve car problems in a timely manner. Such as➤Bi-directional Control➤Full Special Resets➤Full OBDII Modes➤Personalization➤Customization, and keep growing. PS: Don't purchase any resets in the Mall.
- 【Powerful Bidirectional Control/Active Test+Power Balance Test】Launch CRE Scanner fit for Ford inherits the powerful Bi-directional Control(Active test), which send commands to the ecu to test its operating status without using the vehicle controls, quickly understand whether a specific system/component is operating normally, such as EVAP Solenoid/Windows/Wipers/... Power Balance Test: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. And it is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.
- 【All Systems Diagnose Fit For Ford/Lincoln/Mercury/Mazda + All Brands Full OBD2 Functions 】Launch CRE Diagnostic Tool fit for Ford support diagnosis functions for all systems including ENG/ABS/SAS/SRS/TPMS/EPB/IMMO/BMS/Fuel Systems. Launch CRE Elite codes reader is also a universal OBD code reader for ALL BRANDS, which is capable of read and clear codes, view live data like transmission fluid temperature, cylinder balance rates, engine rpm, etc, freeze frame, perform active tests, read ECU info, etc.
- 【All Special Functions Fit For Ford + Programmable Module Installation】Launch Scan Tool supports FULL special functions ONLY fit for Ford, Same Functions as LAUNCH X431, like Oil Reset, Brake Reset, Injector Coding, Adaptive Gearbox, Parts Calibration, Relative Compression, Electronic Throttle Relearn, Reset KAM (Keep Alive Memory), etc. Programmable Module Installation(PMI) Function: when you replace or initialize a new/used module for Ford/Lincoln/Mercury/Mazda, LAUNCH scanner allows you to copy the data from the original module and install it to the new unit to finish the module replacement.
- 🎁🎁【Professional but Easier-to-use for Home】Tired of going to Autozone or other store to run codes, or having to pay the dealer to do it for you? IFIX435 code scanner is your ticket to happiness.Compared to the complexity of the car diagnostics available on the market with unit prices above $200, BOSSCOMM IFIX435 code reader is one of the best investments you can make!
- 🚘🚘【OE-Level All System Diagnostic Tool】Whether you're troubleshooting engine problems, abs, airbag, transmission issues, Bosscomm diagnostic tool easily find and fix the problem with your vehicle. IFIX435 obd2 scanner supports not only Engine, ABS, Transmission, but also EPB, TPMS, SAS, A/C, chassis and other system scans. By reading the ECU version information of each system, providing a🔥 live data stream, 🔥reading the trouble codes and🔥 retrieves freeze-frame, saving home repairers a lot of time and money in maintenance.
- 🚘🚘【Real Deal-LIVE DATA】Real-time, dynamic data is sure to streamline your work! BOSSCOMM IFIX435 car diagnostic scanner for all cars can get instant access to key information about your vehicle's RPM, oil temperature, and more, making diagnosis easier than ever before. Permitting you to see live information streams an even take previews and record this information for later playback.👍Easy to use without space limitations，and actuators to quickly uncover and solve any issues.
- 👍👍【Lifetime F-ree One-Click Update + Smart Auto V-IN】How much have you spent on car maintenance?The code reader is permanently updated for f-ree, which save you a lot of money in the long-term.Buy once and be set for life with this device. The car scanner with smart auto V-I-N technology identifies cars and it also supports manual input. You can connect to your home WiFi or personal hotspot to update it to get newest software and more car coverage.
- 👍👍【Wide Vehicle Coverage Global Mechanics】The BOSSCOMM IFIX435 code reader for cars and trucks can diagnose over 10000+ vehicles(60+ car brands) worldwide mainstream car makes(USA/ASIA/EUROPE), works on OBDII most after 1996 vehicles including the latest 2023 models.It supports 13 different languages at the same time, which can satisfy users all over the world.
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- MADE FOR HOME MECHANICS - This is more than an OBD2 code reader. It offers professional-level functions like car battery reset, hybrid diagnostics, module scanning, and supports English, Spanish, and French.
- PASS YOUR EMISSIONS TEST - With our OBD2 scanner, you can understand your vehicle's emissions status before the state does. It helps ensure you're ready to pass your smog check, making the whole process hassle-free.
- REAL-TIME LIVE DATA - View essential car data like RPM, speed, and oil temperature in real-time. Test your battery and alternator to assess whether professional help is needed.
- WIDE RANGE COMPATIBILITY - Our car code reader and reset tool works with all OBD2 compliant domestic and foreign vehicles sold in the USA made after 1996. This includes cars like sedans, trucks, and SUVs, making it a versatile tool for any DIYer.
- USA DESIGNED & SUPPORTED - We are a Southern California based company and take pride by offering products that are designed and supported by ASE Certified Technicians right here in sunny California. Have questions? Need help? Never hesitate to reach out, our friendly automotive techs are ready to help.
- 🚘 XTOOL Advancer AD20 PRO 👉 2024 newest upgraded Version of AD20, A wireless obd2 code reader integrates full 10 of OBDII tests, all system scan, engine light check, oil rest, battery check, DTC lookup, performance test, trip analysis and other powerful features, Whether you're a professional mechanic or an inexperienced DIYer, repairs can be done easily.
- 🚘 All System Diagnostic Scanner 👉 AD20 Pro diagnostic scan too features with all system scan (In-depth check), accesses all vehicle systems. scan and clear manufacturer specific DTC codes that can’t be found on those c·heap obd scanners. Not just scan and check engine faults, AD20 Pro allows you to perform all scans to Engine, Powertrain, Steering & Brake, Airbag, ABS and more. Note: Read/clear code only, NOT FOR RESET.
- 🚘 Check Engine Light & Oil Reset 👉 Easily find out why the check engine light is on by yourself, quickly read and clear the diagnostic trouble code,view freeze frame, I/M monitor readiness. Also features with oil reset special function, you can effortlessly maintain the oil light at home instead of taking car to mechanic shop. Save your time and m·oney.
- 🚘 User Friendly Exclusive App 👉 Our value is based on comes with its own APP f‘ree downloadable on iPhone iOS, Pad, and Android. lifetime f’ree download, no subscription f‘ee at all. No need to spend a lot of time repeatedly switching through third party apps of varying quality for different features. With its simple interface and complete features and a customized dashboard, you can display your preferred functions, allowing you to focus on the most importantl data intuitively.
- 🚘 Track the Vehicle Performance 👉 The AD20 Pro supports a variety of performance tests and trip analyses. Performance Test allows you to measure datas such as 100 km/h acceleration time/top speed/engine load/engine coolant temperature. Trip Analysis gives you access to data such as top speed, average speed, average fuel consumption etc, analysing driving behaviour, helping you to monitor your car's performance over time and optimise your driving behaviour, improving driving safety. Also support personalise your head-up display with the Smart Dash feature.
- [2023 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen for a tablet-like user experience. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide, provide an unparalleled diagnostic experience at an affordable price.
- [TOPDON's Newly Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [Newly Released DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast.
- [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
Last update on 2024-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.