Rear Console Lid is Loose – 2014-2015 Mazda

“This site contains affiliate links for which OEMDTC may be compensated”

2014-2015 MAZDA6, 2014-2015 MAZDA3 – REAR CONSOLE LID IS LOOSE

APPLICABLE MODEL(S)/VINS

2014-2015 Mazda3 Japan built vehicles with VINs lower than JM1 BM ****** 255207 (produced before January 12, 2015)

2014-2015 Mazda6 vehicles with VINs lower than JM1 GJ ****** 186473 (produced before May 14, 2014)

 

Loose rear console lid (A).

rear console lid (A)

 

This may be caused by hinge pins coming partially off (B) or completely off.

hinge pins

 

REPAIR PROCEDURE

  1. Remove the rear console panel by pulling in the direction of the arrows shown below.

NOTE: Begin by pulling from the bottom to detach inner attachment clips (C), then continue pulling from the top to detach inner attachment clips (D).

Rear Console Panel

  1. Re-install the rear console lid pin(s) back to the original position.

 rear console lid pin

  1. Mazda3 and Mazda6 without ventilation, install a new rear console panel. (See PART(S) INFORMATION)

NOTE: The shape of the rear console panel has been changed, by adding a stopper rib to prevent the pin from coming off.

  1. Mazda6 with ventilation, install a new rear console panel (see PART(S) INFORMATION) and reuse the rear and front ducts (A).

Rear Console Panel

NOTE: The shape of the rear console panel has been changed, by adding a stopper rib to prevent the pin from coming off.

 

Rear Console Panel with Ventilation Repair Information

  • Remove the 4 screws from the front and rear ducts.
  • Remove the front duct (A) from the rear console panel (B).

Rear Console Panel

  • While opening both side ends of the rear console panel, disengage the tabs (C) of the rear duct (D) from the rear console panel, then remove the rear duct.

tabs (C)

  • Install the front duct to the new rear console panel using the following steps.
  1. Align the tab of the rear console panel and the hole of the rear duct.
  2. Align tabs of the rear duct and holes of the rear console panel.
  3. Align tabs of the rear console panel and holes of the rear duct.
  4. Push the rear duct (D) to engage the tabs into the rear console.

tabs

  • Install the front duct to the rear console panel in reverse order of removal.
  • Install the 4 duct screws.

 

PART(S) INFORMATION

Model Part Number Description Qty. Notes
Mazda6 GHR1-64-47Y-02eBay Rear Console Panel 1 With Ventilation

Rear Console Panel With Ventilation

Mazda6 GHP9-64-470-02eBay Rear Console Panel 1 Without Ventilation

Rear Console Panel Without Ventilation

Mazda3 BHN1-64-471-02 Rear Console Panel 1

 


 

Bestseller No. 1
Gztoyu Center Console Lid Latch for Mazda CX5 KE 2013-2016, Car Center Console Latches Replacement KA0G-64-45YA-02
  • 🌎 Center Console Latch Replacement Latch for Mazda: This auto center console lid latch is fit for Mazda CX-5 2013-2016 KA0G-64-45YA-02, please check before purchasing.
  • 🌎 A Perfect Center Console Latch Replacement: Easy installation, just remove the underneath board to expose the old latch and replace it, no need to drill. Latches vehicle try-on testing has been conducted to ensure a trouble-free installation and it makes your armrest storage more organized.
  • 🌎 For Mazda CX5 Center Console Latch Lock: Center Console lid lock made of high-quality material for longer service life, reliable and durable for long-lasting use, making the console locked again.
  • 🌎 Package Contents of the Armrest Lid Latch Replacement: 1 x Center Console Latch for Mazda cx5 accessories.
  • 🌎 Contact Us: If you have any questions with our center console latch replacement , please contact us in time, we will solve the problem for you and bring you a pleasant shopping experience.
Bestseller No. 2
Car Center Console Lid Lock for Mazda CX-5 KE 2013-2016,KA0G6445YA02,KA0G-64-45YA-02,Center Console Latch Lid Lock Replacement for Mazda CX-5 KE,Armrest Lid Latch Replacement for Mazda Series vehicles
  • 【For Mazda Centre Console Latch Lock】 The console lid lock is made of high-quality material for longer service life, and long-lasting use, making the console locked again.
  • 【Compatible with Mazda cx 5 Accessories】The parts replacement number of this auto center console lid lock is fit for Mazda 2013-2016 CX-5 KA0G-64-45YA-02, please check before purchasing.
  • 【Center Console Replacement Latch for Mazda】 Easy installation, needs to remove the underneath board to expose the old latch and replace it, no need to drill. A perfect replacement, vehicle try-on testing has been conducted to ensure a trouble-free installation.
  • 【Benefits of the Console Lock Cover】 Direct replacement for a perfect fit, mount between center armrest pad and bracket. designed as an exact match for the original to blend in with the overall aesthetic appearance of your interior.
  • 【Package Contents of the Armrest Lid Latch Replacement】 This latch comes with 1 mazda cx5 center console latch. Please check before purchasing.
SaleBestseller No. 3
Bestseller No. 4
OEMASSIVE Car Center Console Lid Lock for Mazda CX-5 KE 2013-2016,Centre Console Latch Lock for Genuine Mazda CX-5 KE Series Vehicles,Armrest Lid Latch Replacement KA0G6445YA02,KA0G-64-45YA-02(Black)
  • Centre Console Latch Lock by OEMASSIVE: Console lid lock made of high-quality material for longer service life, reliable and durable for long-lasting use, making the console locked again. Make your armrest storage more organized.
  • Compatible with Mazda cx5 Center Console Latch: This auto center console lid lock black is fit for Mazda 2013-2016 CX-5 KA0G-64-45YA-02, please check before purchasing. Parts Replacement Number KA0G-64-45YA-02, KA0G6445YA02.
  • Easy to Install: Easy installation, needs to remove the underneath board to expose the old latch and replace it, no need to drill. A perfect replacement, easy to install, vehicle try-on testing has been conducted to ensure a trouble-free installation.
  • Benefits of the Console Lock Cover: Direct replacement for a perfect fit, mount between center armrest pad and bracket. designed as an exact match for the original to blend in with the overall aesthetic appearance of your interior.
  • Package Contents: This latch comes with 1 mazda cx-5 center console latch.
Bestseller No. 5
KarDesigners Fits 2014-2016 Mazda 6 Synthetic Black Leather Center Console Lid Armrest Cover Cover (Skin Only)
  • 100% Premium Automobile Synthetic Black Leather
  • Replace your worn out Center Console Lid Armrest Cover for your 2014-2016 Mazda 6
  • Upholstery material for your Center Console Lid Armrest Cover
  • Restore your Center Console Lid Armrest Cover to look better than new.
  • Restore your
SaleBestseller No. 6
A ABIGAIL Center Console Cover Armrest Cover Compatible with Mazda CX5 2017 2018 2019 2020 2021 2022 2023 PU Leather Console lid Armrest Box Protector Cover Armrest Cushion Pad (Black)
  • 【High Quality】Made from durable artificial PU leather material. Wearable and leak-proof. The unique design looks fashionable and luxurious, provides you a comfortable driving experience.
  • 【Application】This Center Console Armrest Cover fits for Mazda CX-5 2017 2018 2019 2020 2021 2022 2023.
  • 【Protect your Center Console】Perfect to replace your worn out or broken armrest covers. Easy to clean and anti-scratch, no worry about scratches whether finger nails, pet claws or keys scratches.
  • 【Easy to Install】Easy installation with no drilling. No tools or adhesives are required. Use the flexible elastic bands go under the lid to fix the cushion on the center console of the vehicle.
  • 【Service】100% satisfaction guarantee, If you have any issues with the Armrest Cover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
Bestseller No. 7
X AUTOHAUX KA0G-64-45Y-02 Black Center Console Latch Lid Lock Replacement for Mazda CX-5 2013-2017
  • OE Number: KA0G-64-45Y-02
  • Fit for Mazda CX-5 2013-2017.
  • The brand new latch is prefect to replacement for the old one, no need to buy the entire lid or the entire console.
  • Easy installation, needs it to remove the underneath board to expose the old latch and replaces,no need to drill.
  • Made of plastic material, reliable and durable for long-lasting use, make the console locked again.
Bestseller No. 8
X AUTOHAUX Car Center Console Armrest Cover for Mazda 3 2014-2016 Faux Leather Interior Arm Rest Cover Elbow Cushion Pad Black Red Stitches
  • Fitment: for Mazda 3 2014 2015 2016​. Please check the fitment and specifications before purchasing the product.
  • Material: Faux leather, soft and elastic, durable material, soft texture and make your elbow feel comfortable. Abrasion scrape resistance and don't worry about your leather abrasion and scratch, longer service life. Good toughness. The appearance effect of faux leather is similar to that of real leather, its thickness uniformity, tear strength is better than natural leather, and it is not easy to be torn apart.
  • Waterproof and Easy to Clean: Unique waterproof material. Sweat proof and waterproof, easy to clean, no longer worry about your car getting damp and moldy.
  • Full Protection: Full protection for your center console, it is wide enough to wrap the entire compartment to avoid nails, pet claws or key scratches.
  • Installation: Just slide it into place in seconds. Solid elastic band goes under the lid and holds it in place. Direct replacement and perfect fit.
Bestseller No. 9
Ezzy Auto Center Console Armrest Lid Latch fit for 2013-2016 Mazda CX-5 KA0G-64-45YA-02
  • REPL: KA0G-64-45YA-02
  • Item included: 1 x Center Console Latch
  • Compatible With: Fit for 2013-2016 Mazda CX-5
  • Color: Black
  • Ezzy Auto Parts
Bestseller No. 10
Auto Console Covers- Fits The Mazda CX-5 2016 Center Console Armrest Cover Fleece Fabric - Black
  • Custom Fit - Our Center Console Armrest Covers are custom fitted for the models below
  • Fits years, make, and model -Mazda CX-5 years 2016.
  • Soft Anti-pill Fleece - High quality fabric adds comfort and longevity. Protects against wear and tear, dirt and damage. An Anti-pill fleece means the fabric does not pill at the surface( does not shed) it is a long lasting fabric able to withstand many years of use.
  • Made in the U.S.A. - Love it or send it back, we employ local seamstresses, our products are ready to ship and handle any problems associated with your purchase.
  • Care - Machine washable, tumble dry

Last update on 2024-03-29 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


 

5 thoughts on “Rear Console Lid is Loose – 2014-2015 Mazda”

  1. Wonderful! This problem with my car has been annoying me for months. At it’s latest service I referred it to the Mazda dealer who fobbed me off with “sorry mate, but it’s out of warranty now”. Your instructions helped me fix it easily in minutes. Many thanks.

    Reply

Leave a Reply to Paul Cancel reply

1
Share to...