1998-2000 B2500 High Idle – Manual Transmission
APPLICABLE MODELS
All 1998-2000, B-2500 with manual transmission.
Some vehicles may exhibit a high idle.
This may be caused by a poor electrical connection at the wire harness to the Throttle Position Sensor (TPS).
A service kit is available to resolve this concern.
Customers having this concern should have their vehicle repaired using the following procedure.
REPAIR PROCEDURE
- Install service kit per attached instructions.
PARTS INFORMATION
| Part Number | Description | Qty. |
| 1F00-18-145 | Service Kit – TPS Connector | 1 |
TPS CONNECTOR INSTALLATION INSTRUCTIONS
Use the following procedures to install the TPS Connector.
- Unhook TPS connector.
- Cut TPS connector off at connector and remove plastic sheathing.
- Install sheathing on new TPS connector pigtail.
- Locate the brown/white wire at location A.
- Cut and splice in a butt connector (provided in kit) approximately 45mm from the TPS connector.
- Crimp butt splice connector and shrink tubing with heat gun of an acceptable heat source.
- Locate the gray/white wire at location B.
- Cut and splice in a butt connector (provided in kit) approximately 85mm from the TPS connector using the above procedure.
- Locate the gray/red wire at location C.
- Cut and splice in a butt connector (provided in kit) approximately 125mm from the TPS connector using the above procedure.
- Reinstall plastic sheating.
- Tape over all wiring and sheathing with electrical tape or equivalent.
- Install TPS connector to TPS sensor.
Bestseller No. 1
Heat Shrink Wire Butt Connector Kit Marine Waterproof Crimp Splice Terminal
- Package Included: 50 pcs red waterproof wiring connectors for 22, 20, 18, 16 gauge wires, 40 pcs blue waterproof wiring connectors for 16, 14 gauge wires, 10 pcs yellow waterproof wiring connectors for 12, 10 gauge wires—total 100 pcs
- Premium Copper Core: The butt splice terminals use seamless and high-quality thick copper tubular, which makes the connection project safer! Fix the wire firmly, increase current flow, and decrease voltage drop
- Wide Usage: Our heat shrink wire connector is ideal for marine, automobile, industry, electrical and electronics. Whether working on boat, vehicle, RC car, home, scientific project, car stereo, or electrical DIY, the crimp connectors will work well
- 3:1 Heatshrink Ratio: The heat shrink butt connector has dual-wall shrinking tube and inside hot melt glue, providing a fully safe seal and wire corrosion. Its dual wall insulation seals against moisture corrosion, air leakage, and can be used underground
- AIRIC Brand Advantages: As a professional manufacturer of electrical accessories, we own a large leading wire connectors factory and get UL, CE, ROHS, SGS, and ISO9001-2005 international quality system certification
SaleBestseller No. 2
TICONN 100PCS Heat Shrink Butt Connectors, Crimp Wire Connectors Kit
- Solid Crimp: Seamless tinned copper barrel grips each wire without splitting, giving these butt connectors a strong hold that helps reduce the risk of short circuits; The thick copper barrel helps reduce voltage drop, supports high current flow, and minimizes heat buildup for dependable electrical connectors
- Watertight Seal: These heat shrink butt connectors feature dual-wall tubing with a 3:1 shrink ratio and a heat-activated adhesive lining, creating a secure 360-degree seal around each crimp; The dual-wall tubing helps seal out moisture and reduce corrosion, making these heat shrink wire connectors suitable for underground conduit, engine bays, and other demanding environments
- Color-Coded Sizing: Color-coded tubing lets you quickly identify the right butt splice connectors by wire gauge, with red for AWG 22–16, blue for AWG 16–14, yellow for AWG 12–10, black for AWG 14–12, and white for AWG 24–22; Strip, insert, and crimp with a standard tool, then apply heat to create secure wire connectors for a wide range of wiring projects
- Wide Applications: Ideal for marine, automotive, home, trailer, and outdoor wiring projects; These marine butt connectors provide dependable connections for boat consoles, bilge pumps, vehicle wiring, outdoor speakers, and other electrical installations where moisture protection is important
- Available Options: This assortment includes red, blue, and yellow waterproof butt connectors for wire sizes from AWG 22–10; Choose the appropriate color-coded connector to match your wire gauge for marine wire connectors, vehicle harnesses, home electrical wiring, and other electrical applications
SaleBestseller No. 3
Kuject Heat Shrink Solder Seal Wire Connectors Kit 120PCS
- Time Saver: Solderless,crimpless, all you need is just a heat gun to finish the joint, much faster and easier than the old way
- Fit for Confined and Narrow Spaces: Can be bent after connection and no need to crimp or solder in the confined area, just control the temperature via a heat gun
- Waterproof and Seal Performance: There is two hot melt waterproof adhesive rings in each butt connector, which help it hold up better to moisture
- High Temperature Proof in A Short Time: Use exclusive material in the butt connectors to avoid shrink tubing melting before solder ring
- IATF16949:2016 Listed: The Kuject solder seal connectors meet the newest standard of International Automotive Task Force, which is the most standardized way for you to repair or modify your car
Bestseller No. 4
50 Pcs Heat Shrink Butt Connectors Kit,Heat Shrink Wire Connectors,Waterproof Insulated Marine Automotive Crimp Terminals Butt Splice for Marine Automotive Motorcycle Truck Electrical
- [EXECELLENT QUALITY] : Direct factory with excellent quality control, STRONG & DURABLE. The copper core of our heat shrinkable joints is made of high quality tinned copper, in addition to being extremely conductive, it is easier to flatten and grip the wire
- [EASY USE] : Take two wires you wish to join. Remove the wire insulator, pick the terminal color you want. Insert the wire into the terminal one at the time and crimp by crimping tool, insert another terminal and crimp. Use air gun to apply heat on the heat shrink connectors.
- [PRACTICAL DESIGN] : Double-wall design, outer layer of polyolefin tube, inner layer of hot melt adhesive, precise crimping and good contact. Electrical butt connectors provide high tensile strength and adequate hot melt adhesive inside the tube. After shrinking, the wiring is firm and not loose, and it can ensure that the current continues to flow smoothly.
- [WIDE APPLICATIONS] : Our waterproof terminals are perfect for marine, automobile applications, electrical and electronics industries. Whether working on your Boat, Vehicle, Home, or Scientific project, the electrical crimp connector will ensure a strong waterproof seal to make sure everything bonds correctly.
- [PACKAGE INCLUDED] : 25 pcs red connector ( 22-16 AWG ), 15 pcs blue connector ( 16-14 AWG ), 10 pcs yellow connector ( 12-10 AWG ).
Bestseller No. 5
Heat Shrink Butt Connectors, 16-14 AWG 100Pcs Blue Waterproof Electrical Crimp Wire Splice for Marine, Cable, Wiring
- Tinned Copper Core: Butt connectors use a heavy-duty copper core, strong crimp, higher conductivity
- Package Includes: 100Pcs Blue heat shrink butt connectors that can be used on wire AWG from 16 to 14
- Solderless Crimping: Insert the wires to be connected, crimp both sides with crimping pliers, and then heat with a heat gun
- 3:1 Shrink Ratio: Marine grade heat shrink tubing provides high tensile strength and enough hot melt adhesive inside the tubing to ensure waterproof performance, your wires will never slip out of the wire connectors
- Wide Application: Wire connectors are waterproof, stable, and corrosion resistant and are used in the automotive, marine, electrical, and electronic industries
This product presentation was made with AAWP plugin.