Replacement Engine Assembly Failure
1080M
If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.
Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.
Clean the intake manifold internally to remove any debris from old engine before installing the new
replacement engine assembly.
If the intake manifold cannot be properly cleaned internally, replace it.
Warranty Compliance
Note: Mazda’s Warranty Policy does not cover damage to the replacement engine if the intake manifold was not cleaned properly.
| MAZDA | CX-3 | 2016 |
| MAZDA | CX-5 | 2013-2016 |
| MAZDA | CX-7 | 2007-2012 |
| MAZDA | CX-9 | 2007-2016 |
| MAZDA | MAZDA2 | 2011-2017 |
| MAZDA | MAZDA3 | 2007-2017 |
| MAZDA | MAZDA5 | 2011-2016 |
| MAZDA | MAZDA6 | 2007-2017 |
| MAZDA | MX-5 | 2007-2016 |
| MAZDA | RX-8 | 2007-2011 |
1080M
MTI1080
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
- Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
- Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
- Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | GM dexos1 Gen 3 | Meets Ford WSS-M2C947-B1 | Meets Ford WSS-M2C962-A1 |
- Improves Gas Mileage***
- Helps increase engine efficiency
- Protects for 15,000 miles – guaranteed*
- Contains additives to help fight sludge
- Suitable for Hybrid vehicles
- Our most advanced full synthetic 0W-20 engine oil, designed for unbeatable engine protection*
- Pennzoil Ultra Platinum comes with a 20-year, 750,000 mile warranty** to protect your engine and give you peace of mind to drive every mile as hard as you can
- Made with natural gas
- Outstanding performance in extreme temperatures
- Designed for high-performance engines, it helps protect engines from loss of power
This product presentation was made with AAWP plugin.