| Subject:
AUDIO / INFOTAINMENT SYSTEM SERVICE INFORMATION | Bulletin No: 09-030/15 |
| Last Issued: 08/07/2015 |
BULLETIN NOTE
- This bulletin supersedes the previous bulletins 09-028/12 issued on 10/19/2012, 08/10/12 and 07/27/12, 09-022/11 issued on 09/01/2011 and 09-074/09 issued on 11/13/2009. The APPLICABLE and DESCRIPTION have been revised.
- Changes are noted below in Red beside the change bar.
APPLICABLE MODEL(S)/VINS
| 2011-2015 Mazda2 | 2004-2016 Mazda6 | 2007-2012 CX-7 | 2004-2011 RX-8 |
| 2004-2016 Mazda3 | 2016 CX-3 | 2007-2016 CX-9 | 2004-2006, 2008-2011 Tribute |
| 2006-2010, 2012-2015 Mazda5 | 2013-2016 CX-5 | 2006-2016 MX-5 | 2004-2006 MPV |
DESCRIPTION
Mazda infotainment systems require contacting the proper source for diagnostic support, parts authorization, and parts exchange. Some components require prior authorization before ordering as exchange.
Refer to DAG Exchange Central (MXConnect>Parts and Accessories>Parts>Programs>Exchange Central) for component availability, source of technical support and prior authorization requirement.
NOTE: Always check for a TSB that may modify or eliminate prior authorization for a specific symptom for a given component.
TECHNICAL SUPPORT
The Mazda Technical Hotline provides support for most components. Some limited components require authorization from the vendor for warranty exchange. Refer to DAG Exchange Central for the most current support information.
NOTE:
- For in-stock vehicles, dealers will be directed to order new parts. Only in-stock vehicles require installation of a new components and DSM authorization. Contact the Dealer Assistance Group.
- Refer to Section 3 of the Mazda Warranty Policies & Procedures Manual and any current warranty bulletins for parts exchange procedures. Failure to follow the proper warranty procedures may result in a warranty debit.
- Some components are available as exchange for warranty repairs and some are available as exchange for out of warranty repairs. Contact the supplier for prices and availability.
09-030/15
08/07/2015
- 【Reliable Offline GPS Navigation】: Enable built-in offline navigation for the United States, Canada, and Mexico directly through your vehicle’s factory infotainment system. Ideal for road trips, tunnels, mountain highways, rural areas, and locations with weak cell coverage. Designed as a dependable backup navigation solution alongside CarPlay or smartphone apps
- 【Compatible Mazda Models】: Compatible with select Mazda vehicles equipped with the factory Mazda Connect system and SD card slot: CX-30 (2025–2026), Mazda 3 (2025–2026), CX-50 (2025–2026), CX-70 (2025–2026), MX-5 (2024–2026), CX-90 (2026)
- 【VIN Compatibility Assistance & Free exchange Support】: Not sure which navigation card your vehicle requires? Message us with your VIN for compatibility verification before purchase. Ordered the wrong model? If a compatible model is available, we offer a one-time free exchange within 2 months of purchase
- 【Simple Plug-and-Play Activation】: No dealer visit or complicated setup required. Insert the SD card into the vehicle’s SD slot with the engine off, then restart the vehicle to activate factory navigation automatically
- 【Factory Navigation Features & HUD Support】: Works directly through your vehicle’s factory infotainment system for a clean OEM-style navigation experience without extra screens or phone mounts. Supports voice-guided navigation and HUD features on compatible vehicles
- North America GPS Map Coverage – Preloaded navigation SD card with detailed road maps for the USA, Canada, and Mexico. Provides reliable turn-by-turn directions to help you reach your destination with confidence, even without an internet connection
- Wide Mazda Compatibility (Select 2024–2026 Models) – Compatible with select Mazda CX-30, Mazda 3, CX-50, CX-70 (2025–2026), MX-5 (2024–2025), and CX-90 (2026) equipped with navigation-enabled systems
- Easy Plug & Play Installation – Simply insert the navigation SD card into your vehicle's designated SD slot (often found in the center console or glove box) before starting the engine. No programming, no dealership visit, and no internet connection required—your system is ready to use in minutes
- Seamless System Integration & Smart Features – Designed to integrate smoothly with your vehicle’s infotainment system, offering clear route guidance, speed limit display, and compatibility with Head-Up Display (HUD) and voice command functionality on supported models (When your vehicle is equipped with these features)
- Reliable Offline Navigation for Any Journey – Navigate confidently without relying on cellular signal or mobile data. Ideal for road trips, remote areas, and as a dependable backup when smartphone GPS is unavailable
- 【Updated Navigation SD Card for USA, Canada & Mexico】This updated navigation SD card comes pre-loaded with the latest offline navigation map for the United States, Canada, and Mexico. No cell signal needed—enjoy extensive, self-contained map data covering millions of points of interest, including hotels, gas stations, restaurants, pet stores. Whether you’re navigating busy city traffic, rural backroads, or remote areas, this navigation memory card delivers full, reliable offline guidance that never leaves you stranded when the signal drops.
- 【Vehicle Compatibility & Plug-and-Play Simplicity】This navigation SD card is built for a seamless fit with select Mazda models equipped with the factory Connect system, including 2025-2026 Mazda 3 CX-30, CX-50, CX-70, and 2024-2026 MX-5. Installation is straightforward: with the engine off, insert the card into your car’s SD slot. Upon ignition, the system auto-activates and integrates securely—no dealer visit required.
- 【Heads-Up Display (HUD) for Safer Driving】A superior advantage over smartphone navigation apps. This Mazda SD navigation card enables turn-by-turn directions to beam directly onto your Mazda’s Heads-Up Display (HUD) screen. This navigation memory card Keep your eyes on the road and reduce distracted driving, especially helpful during high-speed freeway interchanges or complex city traffic.
- 【Important Installation Note & VIN Lock】The mazda navigation map is designed to be locked to one vehicle’s VIN permanently; it cannot be transferred to another car once inserted. For first-time use, the system may need 1-2 hours or an overnight restart to fully synchronize GPS signals and complete background indexing. Please be patient during this one-time initialization process. Do not attempt to update the map data manually or insert the card into a computer to avoid permanent damage.
- 【What's Included】You will receive the KR9D66EZ1B Navigation Card, ready to use. To reduce paper waste, we only include the navigation SD card in the package. A digital user manual is available upon request, and we also offer free VIN check services to ensure this card fits your vehicle perfectly. Just send us a message and we will reply within 24 hours.
- 【Compatible Vehicles】The Navigation SD Card Compatible with Mazda 2014-2018 - 3, 2016-2024 - Mazda 6/CX-3/MX-5, 2016-2020 - CX-5/CX-9. For more car models, please carefully see product description
- 【Latest Navigation】The SD card is used to store video data for automotive navigation, including maps & road info. It's updated with the latest map database, covering the newest expanded coverage of hundreds of cities, counties, and metropolitan areas in all 50 U.S. states, Puerto Rico, and Canada.(Note:Only for SYNC systems using SD card navigation)
- 【Built in High-end Chip】The Ford Navigation SD card is comprised of high-end chip. It boasts 32GB of memory and high-speed data processing capabilities, making it resistant to burnout or damage during use
- 【Easy to Install】First, turn off the vehicle to ensure no current is flowing. Next, locate the SD card slot and insert the new navigation SD card into the slot until you hear a click, indicating completion of installation. (The slot is spring type. Don't forcibly pull out the SD card without fully inserting it, as this may easily damage the chip)
- 【Order with Confidence】Please verify the vehicle model and dimensions prior to placing your order. Should you have any inquiries, do not hesitate to reach out to us, and we will respond to you as promptly as possible
- Navigation memory Card KMV666EZ1C Compatible with Maz*da 2016-2020 CX-5 / CX-9, 2014-2018 Maz*da 3, 2016-2023 Maz*da 6 / CX-3 / MX-5, Upgraded USA/CAN/MEX Maps -10 Years Warranty
- Compatible with below Vehcile Models KMV666EZ1C , Maz*da 3 (2014-2018) Maz*da 6 (2016-2023) Cx-3 (2016-2023) Mx-5 (2016-2023) Cx-5 2016-2020 (works only with 7.5-8.5 inches display with Connect System 1) Cx-9 2016-2020 (works only with 7.5-8.5 inches display with Connect System 1)
- Please Check Details Carefully Compatible with: CX-5, CX-9 (2016–2020)(Connect System 1 Only, 7.5–8.5” Display); Mazda 3 (2014–2018); CX-3, Mazda 6, MX-5 (2016–2023). Not sure? Send us your VIN—we’ll help confirm before purchase
- Please Note: This map is for North America and Mexico only. Please note that this navigation card is only compatible with the following vehicle models. If you are unsure, please send us your VIN and we will happily check for you
- Please Note: The Navi card can be used only in one car, once it is installed to the navigation system for the first time, it will be locked with cars VIN. Navigation system Navi cards cannot be used/switched from one vehicle to another
This product presentation was made with AAWP plugin.





