NHTSA ID Number: 10162011
Manufacturer Communication Number: 00-004-19-3602
Summary
In support of the newly launched 2019 Mazda3, Mazda
will ship to all dealers one new Special Service Tool (SST). The SST will be shipped automatically by Mazda’s tool vendor, Bosch, during June 2019. The following SST is the latest addition to the Mazda Required Tool (MRT) list. 49JP-02-002A-1 (Lock Ring Wrench (for AWD Set Plate Removal/Installation)
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| MAZDA | MAZDA3 | 2019 |
APPLICABLE MODEL(S)/VINS
2019 Mazda3
DESCRIPTION
In support of the newly launched 2019 Mazda3, Mazda will ship to all dealers one new Special Service Tool (SST). The SST will be shipped automatically by Mazda’s tool vendor, Bosch, during June 2019.
Bulletin No.: 00-004/19
Last Issued: 06/11/2019
- COMPACT DESIGN: Conduit Locknut Wrench Set designed to easily tighten and loosen locknuts in tight spaces
- 3 CONVENIENT SIZES: Set includes commonly used conduit sizes, 1/2-Inch, 3/4-Inch, and 1-Inch
- MAGNETIC STORAGE: Two internal magnets on each wrench securely hold the set together, ensuring easy storage and organization in your toolbox
- MANEUVER TIGHT SPACES: Slim design allows for easy access when space is limited
- QUICK IDENITIFICATION: Etched markings and color helps to easily identify the size of each wrench
- PATENT PENDING: Klein Tools Locknut Wrench is designed with opposing offset bends to easily tighten and loosen locknuts in tight spaces
- 3 CONVENIENT SIZES: Set includes commonly used conduit sizes, 1/2-Inch, 3/4-Inch, and 1-Inch
- MAGNETIC STORAGE: Two internal magnets on each wrench securely hold the set together, ensuring easy storage and organization in your toolbox
- MANEUVER TIGHT SPACES: Slim design allows for easy access when space is limited
- QUICK IDENITIFICATION: Etched markings and color helps to easily identify the size of each wrench
- The HCW-17 features two different radius hooks for a precise fit on most head-gear lockrings
- One is sized to fit rings with an outside diameter of 41 to 42mm.
- The other side fits rings of 43 to 44mm
- Also fits single-speed cassette hubs using lockrings with external notches
- Product information: head gear locking ring wrench for bicycles, head gear locking ring wrench with two hooks of different radii, one side has an outer diameter of 41 to 42 mm, the other side has a ring length of 43 to 44 mm, brand new and high quality, 1 pack
- Locking wrench compatibility: The lock ring spanner can be used to install and remove external grooved locking rings, as well as to tighten fixed-gear bicycle locking rings, adjustable cup cone bottom bracket locking rings, and is also suitable for installing single-speed cassette hubs with external grooved locking rings.
- Reliable material: this wrench is made of high-quality heat-treated steel, which is lightweight and sturdy, guaranteeing excellent strength, ensuring longevity, and will not deform under strenuous use, making it easy to tackle the toughest locking ring removal and installation tasks
- The excellent quality of the tool ensures a tight, precise fit of the locking ring, while the added length adds both ideal leverage and keeps the knuckles away from the spokes. The unused end can be wrapped in tape or cloth to provide better grip and cushioning.
- Good after-sales service: if you have any questions about our head gear locking ring wrench, please feel free to contact us, we are happy to help you!
- Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts
- Etched markings allow for easy identification; clearly marked tighten and loosen ends make usage a breeze; each tool is a different color for easy size identification
- Thin design allows easy maneuvering in tight locations
- Hooked tip latches onto locknut and maximizes turning leverage
- 3-piece kit includes the 1/2 in. , 3/4 in. and 1 in. sizes
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
Technical
Service Bulletin Mazda North American Operations
Irvine, CA 92618-2922
Page 1 of 2
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Subject:
Bulletin No.: 00-004/19
SPECIAL TOOL SHIPMENT – JUNE 2019
Last Issued: 06/11/2019
APPLICABLE MODEL(S)/VINS 2019 Mazda3 DESCRIPTION DESCRIPTION/PRICING In support of the newly launched 2019 Mazda3, Mazda will ship to all dealers one new Special Service Tool (SST). The SST will be shipped automatically by Mazda’s tool vendor, Bosch, during June 2019. The following SST is the latest addition to the Mazda Required Tool (MRT) list.
Part Number
Description
Pricing
49JP-02-002A-1
Lock Ring Wrench (for AWD Set Plate Removal/Installation)
$122.00
BILLING INFORMATION
Tool(s) will be automatically invoiced to your dealer parts account statement. If your accounting department has any questions regarding this invoicing, please call Mazda Special Service Tools (949-852-7240). DO NOT send your payment to Bosch.
SHIPPING INFORMATION
Tool(s) will be shipped via UPS ground to your Service Department in June 2019.
Please advise your shipping/receiving personnel of this tool shipment.
OBTAINING ADDITIONAL TOOLS
To order additional SSTs, submit orders using Mazda e-Store at https://dealers.mazdausa.com.
CUSTOMER SERVICE INFORMATION
For warranty or product information call Bosch Customer Service at (800) 533-5338. Customer service representatives are available from 8:00 AM until 8:00 PM ET, Monday through Friday.
Bulletin No.: 00-004/19
Last Issued: 06/11/2019
Page 2 of 2
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical—including photocopying and recording and the use of any kind of information storage and retrieval system —without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
SPECIAL SERVICE TOOL (SST) AND USAGE
PART NUMBER / NAME: 49JP-02-002A-1 Lock Ring Wrench
APPLICABLE MODELS: 2019 Mazda3 AWD
USAGE: To remove/install the Set Plate.
OVERVIEW
USAGE
SEOCONTENT-END
This product presentation was made with AAWP plugin.