| Subject: | Bulletin No: 01-014/15 |
| Last Issued: 12/17/2015 |
BULLETIN NOTE
- This bulletin supersedes the previous bulletin 01-014/15, issued on 07/14/2015. The APPLICABLE MODEL(S)VINS, DESCRIPTION, PART(S) and WARRANTY INFORMATION have been revised.
- Changes are noted below in Red beside the change bar.
APPLICABLE MODEL(S)/VINS
2016 CX-3 vehicles with VINs lower than JM1 DK ****** 103786 (produced before June 01, 2015)
2013-16 CX-5 vehicles with VINs lower than JM3 KE ****** 672620 (produced before June 01, 2015)
2011-15 Mazda2
2016 Mazda2 (Mexico only) vehicles with VINs lower than 3MD DJ6 ***** 102670 (produced before August 03, 2015)
2012-13 Mazda3
2014-15 Mazda3 (Japan built) vehicles with VINs lower than JM1 BM ****** 276064 (produced before June 01, 2015)
2014-16 Mazda3 (Mexico built) vehicles with VINs lower than 3MZ BM ****** 246446 (produced before August 03, 2015)
2014-16 Mazda6 vehicles with VINs lower than JM1 GJ ****** 434937 (produced before June 01, 2015)
DESCRIPTION
Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
- Verify customer concern.
- Replace the engine oil pressure switch. Refer to MS3 online or the Workshop Manual (section 01-11 OIL PRESSURE SWITCH REMOVAL/INSTALLATION).
- Verify repair.
PART(S) INFORMATION
| Description | Qty. | Note | Part Number |
| Oil Pressure Switch | 1 | Except 2011-2015 Mazda2 | PE01-18-501B
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API |
| Oil Pressure Switch | 1 | 2011-2015 Mazda2 | B367-18-501A |
WARRANTY INFORMATION
NOTE:
- This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
- This repair will be covered under Mazda
’s New Vehicle Limited Warranty and California Emission Warranty (short term) or PZEV where applicable. - Additional diagnostic time cannot be claimed for this repair.
| Except 2011-2015 Mazda2 | 201 1-2015 Mazda2 | |
| Warranty Type | ||
| Symptom Code | 76 | 76 |
| Damage Code | ||
| Part Number Main Cause | PE01-18-501A | B367-18-501A |
| Quantity | 1 | |
| Operation Number / Labor Hours: | XXL4DXRX / 0.4 Hrs. | XXL4DXRX / 0.3 Hrs. |
01-014/15
12/17/2015
01-014/15
07/14/2015
- Mobil 1 High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Designed for vehicles with 75,000 miles or more, Valvoline MaxLife Full Synthetic High Mileage Motor Oil helps maximize engine life and performance for the many miles still ahead
- Formulated with seal conditioners to help prevent oil leaks, reduce oil consumption, and improve fuel economy
- Delivers 50% stronger wear protection than industry standards for superior defense against friction and wear
- Provides 20% stronger sludge defense than industry standards to protect against harmful buildup and deposits
- Offers 2.5X better heat protection than industry standards to safeguard engines in extreme conditions
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
- Advanced additives that help prevent engine wear | Improved Fuel Economy**
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1 |* Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1 |
Last update on 2026-05-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.