Convertible Top Inner Cloth Falling Down – 2016 Mazda MX-5

2016 MX-5 – CONVERTIBLE TOP INNER CLOTH FALLING DOWN CAUSING POOR APPEARANCE AND OBSTRUCTING VIEW OF BACK WINDOW

APPLICABLE MODEL(S)/VINS

2016 MX-5 vehicles with VINs lower than JM1ND******110159 (produced before January 19, 2016)

Vehicles may exhibit the inner cloth (A) falling down at the rear end causing a poor appearance and obstructing the view of the back window.

 

Normal	Falling Down

 

This is caused by the J-hook binding holding the inner cloth coming loose during the opening/closing of the convertible top, from vibration during driving or from high ambient temperatures.

To correct the problem, two top-protector clips have been additionally installed to both side edges of the J-hook to prevent the J-hook from loosening and separating.

 

REPAIR PROCEDURE

1. Install the inner cloth.
   1. Open the soft top to the position shown.

1. 2. Install the resin edge of the tension cloth into the J-hook.

1) Pull the tension cloth (A).

2) Turn over the resin edge of the tension cloth (A) to insert into the J-hook (B).

3) Turn over the resin edge of the tension cloth (A) in the direction shown and insert the resin edge of the tension cloth into the J-hook (B).

 

NOTE: Make sure to turn over the resin edge (A) of the tension cloth (B) to the correct direction as shown so that the hook of the tension cloth engages correctly in the J-hook.

OK	Not OK

 

4) Insert the full width of the tension cloth (A) into the J-hook.

1. 3. Install the edge of the inner cloth into the J-hook.

1) Pull the edge of the inner cloth (A).

2) Turn over the edge of the top inner cloth (A).

3) Insert the edge of the inner cloth into the J-hook (A).

Cross view of Tension Cloth and Inner Cloth to show how they are installed in J-Hook

A: Inner Cloth
B: Tension Cloth
C: Rear Joint Plate
D: Outer Cloth
E: J-Hook
F: Patch
G: Back Window

1. 4. Lightly pull the inner cloth and verify that the inner cloth does not come off easily.

 

3. Install the top-protectors onto both edges of the J-hook.
   1. File off the shaded area (A) of the top protector clips (for both left and right sides).

NOTE: Left side shown.

1. 2. Apply 3M black Super Weatherstrip Adhesive to the inside of the top-protector as shown.

1. 3. Install the top-protector clips (A) to both edges of the J-hook.

1) Insert the top protector clip over the left edge of the J-hook (A).

2) Press to insert the the top protector clip until it makes contact with the J-hook (A).

 

PART(S) INFORMATION

Part Number	Description	Qty.	Notes
N247-R1-280	Protector-Top, LH	1	LH
N247-R1-230	Protector-Top, RH	1	RH
03602 3M Black Super Weatherstrip Adhesive, 03602, 1 fl oz, 1 Per Pack Bonds Rubber To Metal For Weatherproof Seals – High-strength adhesive permanently attaches rubber weatherstripping and gaskets to metal surfaces, forming a flexible, waterproof seal on car doors, trunks, sunroofs and more. Durable All-Weather Performance – Stays strong and flexible in extreme conditions. Resists heat, cold, vibration, and exposure to oils, solvents and detergents, ensuring a long-lasting bond that won’t break down even under harsh automotive environments. Easy Application & Fast Cure – Squeezes out smoothly for quick, mess-free use. Easy to brush and spread right from the tube with no clamping needed. Grips in minutes as it becomes tacky, holding seals in place while curing to full strength within 24 hours. Versatile Automotive Use – Bonds effectively to rubber, vinyl, metal, fabric and more, making it useful for a variety of car maintenance projects. Great for reattaching loose door and trunk seals, fixing window weatherstripping or interior trim, and securing gaskets in place. Professional-Grade, Clean Finish – Trusted by auto professionals for decades, 3M’s black formula dries dark for less visible glue lines. It blends into black rubber seals for an OEM-like appearance, giving your repair a clean look while delivering an OEM-quality bond that keeps water, wind and noise out. $9.70 Buy on Amazon Price incl. tax, excl. shipping	3M Super Weatherstrip Adhesive (Black) (1 fl oz)	1	Locally procured part.
08011 3M Black Weatherstrip Adhesive, 08011, 5 fl oz, 1 Per Pack FORMULATED specifically for use with ethylene propylene diene M-class rubber (EPDM) FORMS FLEXIBLE, waterproof bond that resists vibration EASY TO BRUSH and spread right from the tube, saving time RESISTS oil, grease and solvents for permanent repairs BONDS to a range of surfaces including vinyl, gaskets, metal, fabrics and rubber $63.27 Buy on Amazon Price incl. tax, excl. shipping	3M Super Weatherstrip Adhesive (Black) (5 fl oz)	1	Locally procured part.

 

This product presentation was made with AAWP plugin.