| Subject:
ENGINE VIBRATION AND RATTLE NOISE AT IDLE (NO.3 ENGINE MOUNT) | Bulletin No: 01-012/16 |
| Last Issued: 08/26/2016 |
BULLETIN NOTE
This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red beside the change bars.
| Previously Issued TSBs | Date(s) Issued |
| 01-012/16 | 04/29/15 |
| 01-017/15 | 08/04/15 |
APPLICABLE MODEL(S)/VINS
2014-16 Mazda3 (Japan built 2.0L) with VINs lower than JM1BM******345755 (produced before April 6, 2016)
2014-16 Mazda3 (Mexico built 2.0L) with VINs lower than 3MZBM******310796 (produced before June 6, 2016)
DESCRIPTION
Some vehicles may exhibit an engine vibration and rattle noise at idle in D or R range after the engine reaches normal operating temperature. This may be caused by the orifice of the oil-filled No.3 engine mount becoming clogged with deposits generated inside, changing the damping characteristic of the engine mount. To correct the problem, the engine mount has been/will be modified.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
- Verify customer complaint.
- Replace the No.3 engine mount with a newly established modified part used in mass production or a previously established modified service part according to the instructions on MS3 online (ENGINE MOUNT DISASSEMBLY/ASSEMBLY [SKYACTIV-G 2.0, SKYACTIV-G 2.5]).
- Verify repair.
PART(S) INFORMATION
NOTE:
- The modified No.3 engine mounts used in mass production are now available and can be used.
- The service parts and the parts used in mass production have the same performance.
- Check EPC for the part number of the original No. 3 engine mount equipped to the VIN and use the corresponding modified (new) No.3 engine mount.
| Part Number | Description | Qty. | Notes |
| GHY0-39-060 or GHS4-39-060A | No.3 Engine Mount | 1 | A/T (2.0L) |
| GHY1-39-060 or GHR9-39-060A | No.3 Engine Mount | 1 | M/T (2.0L) |
WARRANTY INFORMATION
NOTE:
- This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
- This repair will be covered under Mazda’s Powertrain Warranty.
- Additional diagnostic time cannot be claimed for this repair.
| Warranty Type | A |
| Symptom Code | 83 |
| Damage Code | 93 |
| Part Number Main Cause | GHY0-39-060 (A/T) GHY1-39-060 (M/T) |
| Qty. | 1 |
| Operation Number / Labor Hours: | XXL5PXRX / 0.6 Hrs. |
01-012/16
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- Designed for vehicles with 75,000 miles or more, Valvoline MaxLife Full Synthetic High Mileage Motor Oil helps maximize engine life and performance for the many miles still ahead
- Formulated with seal conditioners to help prevent oil leaks, reduce oil consumption, and improve fuel economy
- Delivers 50% stronger wear protection than industry standards for superior defense against friction and wear
- Provides 20% stronger sludge defense than industry standards to protect against harmful buildup and deposits
- Offers 2.5X better heat protection than industry standards to safeguard engines in extreme conditions
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | Meets Ford WSS-M2C945-B1 | Meets Ford WSS-M2C960-A1 |
This product presentation was made with AAWP plugin.