No Start unless Holding Remote Transmitter Close to START/STOP Button – 2016 Mazda MX-5

2016 MX-5 START CONCERN Condition where they have to hold the remote transmitter to the START/STOP button in order to start the vehicle. DTC B13C3:16 and/or B13C3:29 may also be stored.   This can happen after the front windshield is tinted and water drains down behind the dash during installation. If you encounter this situation and … Read more

Noisy HVAC Blower Motor after Cabin Air Filter Replacement – Mazda

MULTI-MODEL – HVAC BLOWER MOTOR NOISE AFTER CABIN AIR FILTER REPLACEMENT HVAC BLOWER MOTOR NOISE AFTER CABIN AIR FILTER REPLACEMENT Noisy HVAC blower motor after a cabin air filter replacement.   Foreign debris on the blower motor after servicing the cabin air filter may be the cause. During the removal of the cabin air filter, … Read more

Intermittent No Crank / No Start – 2016 Mazda CX-5

2016 Mazda CX-5

MULTI-MODELS 12 2016 CX-5 INTERMITTENT NO CRANK / NO START Some customers may complain about an intermittent no crank/no start. This may be caused by instrument panel wiring harness connector C-11 not fully seated (locked). IDS may show several U codes stored in memory.   Properly secure the instrument panel wiring harness connector C-11 to … Read more

High Engine Coolant Temperature warning light ON with DTC P111A – 2014-2015 Mazda3

2014-2015 MAZDA3 – HIGH ENGINE COOLANT TEMPERATURE WARNING LIGHT ON WITH DTC P111A:00 AND/OR NO HEAT FROM HVAC APPLICABLE MODEL(S)/VINS 2014-2015 Mazda3 Mexico built vehicles with VINs lower than 3MZ BM ****** 137384 (produced before August 15, 2014)   One or more of the following concerns: The High Engine Coolant Temperature warning light ON with … Read more