| “This site contains affiliate links for which OEMDTC may be compensated” |
STOPPER PLATES FOR AIR BAG MODULE CONNECTORS HAVE BEEN ESTABLISHED AS NEW SERVICE PARTS
When removing the connector (1) to the air bag module (2), make sure to first lift the stopper plate (3) carefully using a flathead screwdriver (but do not remove it), and then pull out the connector.
CAUTION:
Pulling out the connector without lifting the stopper plate will cause damage to the connector.
If work is not performed carefully, the stopper plate may pop off/be damaged/become lost.
In case that the stopper plate is damaged/lost during the recall work, the stopper plates have been established as new service parts. Two types of old and new stopper plates exist. The exact switching date from the old to new stopper plate is unknown. Confirm the configuration of the stopper plate used on the vehicle, then order one with the same configuration.
In case that the stopper plate is damaged/lost during the recall work, the stopper plates have been established as new service parts. Two types of old and new stopper plates exist. The exact switching date from the old to new stopper plate is unknown. Confirm the configuration of the stopper plate used on the vehicle, then order one with the same configuration.
GAY1-67-022 Old Type
GAY2-67-022 New Type
Recalls:
9616F 2007-2009 B-Series – Upcoming Safety Recall 9616F For Takata Safety Recall Expansion
9516E 2007-2011 CX-7, 2007-2011 CX-9, 2009-2011 Mazda6, – Takata Passenger Air Bag inflator (Interim Repair)
9416E 2004-2006 MPV, 2004-2011 RX8, 2003-2008 MAZDA6 – Safety Recall 9416E For Takata Safety Recall Expansion
9116A 2004-2006 B-Series Truck Driver Frontal Air Bag Inflator Replacement
9015L 2003-2008 Mazda6 – Passenger Airbag Inflator Replacement Safety Recall
8315F 2004-2006 B-Series – Passenger Airbag Safety Recall
8215F 2003-2008 Mazda6, 2006-2007 Mazdaspeed6, 2004-2008 RX-8 – Driver Airbag Safety Recall
8114L 2003-2006 Mazda6, 2004-2005 RX-8, MPV – Passenger Airbag Safety Recall
SA-001354
