| “This site contains affiliate links for which OEMDTC may be compensated” |
MULTI-MODEL – BSM RADAR AIMING CANNOT BE PERFORMED AFTER RIGHT-SIDE BSM CONTROL MODULE REPLACEMENT
APPLICABLE MODEL(S)/VINS
2016 Mazda2
2016 CX-3
2016 MX-5
If the right-side BSM control module requires replacement for any repair, also replace the left side BSM control module to complete the radar aiming procedure (it is OK to replace the left BSM alone).
REASON
If the right-side BSM control module is replaced alone, “Automatic Configuration” is not performed due to a program error in the module. Because of this, the required “BSM Radar Aiming” cannot be performed.
“Automatic Configuration” as well as “BSM Radar Aiming” can be performed, if the left-side BSM control module is replaced alone or together with the right-side BSM control module.
| Replacement of BSM Control Module | Radar Aiming | |
| Left Side | Right Side | |
| Not Replaced | Replaced | Not Possible |
| Replaced | Not Replaced | Possible |
| Replaced | Replaced | Possible |
NOTE: For details of “Automatic Configuration” and “BSM Radar Aiming”, refer to MS3 online or Workshop Manual section 15-20:
| The following part numbers apply to this service note. | |||
| Model | Part Number | Part Name | Note |
| Mazda2 | DA6A-67-Y80A | BSM Control Module (R) | Also Replace BSM Control Module (L) |
| CX-3 | DB2R-67-Y80A | ||
| MX-5 | N243-67-Y80A | ||
NOTE: Use GEPC with VIN for latest part number.
