MTI1115 The 2016-2017 MX-5, 2016-2017 CX-3 and 2016-2017 CX-9 BSM system vehicle detection has changed. Although the overall function is the same as previous vehicles, vehicle detection is different. Below is brief BSM comparison between the 2016-2017 MX-5/CX-3/CX-9 and other Mazda vehicles. For detailed BSM system information, refer to Service Highlights. Note: Do not perform … Read more
2016 MX-5 – BSM OFF INDICATOR ON WITH DTC U1A4B:97 OR U3000:97 APPLICABLE MODEL(S)/VINS 2016 MX-5 vehicles with VINs lower than JM1ND******104338 (produced before August 20, 2015) Blind Spot Monitoring (BSM) may experience the following conditions (similar to when the BSM control modules detect dirt on the rear bumper surface): The BSM turns “OFF” … Read more
MULTI-MODEL – BSM RADAR AIMING CANNOT BE PERFORMED AFTER RIGHT-SIDE BSM CONTROL MODULE REPLACEMENT APPLICABLE MODEL(S)/VINS 2016 Mazda2 2016 CX-3 2016 MX-5 If the right-side BSM control module requires replacement for any repair, also replace the left side BSM control module to complete the radar aiming procedure (it is OK to replace the left … Read more
MULTI MODEL – BSM OFF INDICATOR LIGHT FLASHING WITH DTC U3000:54 APPLICABLE MODEL(S)/VINS 2014-2015 Mazda3 Japan built vehicles (equipped with BSM) with VINs between JM1BM******100001 and 227916 (produced before August 7, 2014) 2014 Mazda3 Mexico built vehicles (equipped with BSM) with VINs between 3MZBM******100001 and 210564 (produced before May 23, 2014) 2014-2015 Mazda6 vehicles (equipped … Read more