VEHICLE CONTROL MODULE REPROGRAMMING MTI1099 1099M When reprogramming a control module, always use the GR-8 battery management system Power Supply Mode. If not used, the control module reprogramming may fail due to a weak vehicle battery. The GR-8 battery management system Power Supply Mode prevents the vehicle battery from being discharged. This allows the IDS … Read more
Multi-Model (Equipped with auto-dimming mirror) MTI1066 1066M Auto-Dimming Mirror improper operation Some customers may complain about improper operation of the auto-dimming mirror. This may be caused by an obstruction of the front and/or rear light sensor(s) (e.g. hanging a parking permit from the mirror). Use a soft cloth with mild detergent to clean the mirror. … Read more
Evaporative Emission (EVAP) System Leak Inspection Change MTI1102 1102M Workshop Manual EVAP system leak inspection using the M-MDS has been discontinued for some models. Instead, the Workshop Manual EVAP system leak inspection using EVAP leak tester will be used to troubleshoot EVAP system leaks. The EVAP system leak inspection using the M-MDS has been … Read more
SMART CITY BRAKE SUPPORT (SCBS) UNINTENTIONAL OPERATION MTI1079 1079M In certain conditions, Smart City Brake Support (SCBS) may operate unintentionally. The Owner’s Manual provides 7 examples: Objects on the road at the entrance to a curve. Vehicles passing in the opposite lane while making a curve. Metal objects, bumps, or protruding objects on the road. … Read more
MTI1115 The 2016-2017 MX-5, 2016-2017 CX-3 and 2016-2017 CX-9 BSM system vehicle detection has changed. Although the overall function is the same as previous vehicles, vehicle detection is different. Below is brief BSM comparison between the 2016-2017 MX-5/CX-3/CX-9 and other Mazda vehicles. For detailed BSM system information, refer to Service Highlights. Note: Do not perform … Read more