Audio / Infotainment System Service Information – 2004-2016 Mazda

2016 Mazda6

Subject: AUDIO / INFOTAINMENT SYSTEM SERVICE INFORMATION Bulletin No: 09-030/15 Last Issued: 08/07/2015   BULLETIN NOTE This bulletin supersedes the previous bulletins 09-028/12 issued on 10/19/2012, 08/10/12 and 07/27/12, 09-022/11 issued on 09/01/2011 and 09-074/09 issued on 11/13/2009. The APPLICABLE  and DESCRIPTION have been revised. Changes are noted below in Red beside the change bar. … Read more

Stains Found On Paint During PDI – 2014-2016 Mazda

2016 Mazda6

Subject: STAINS FOUND ON PAINT DURING PDI Bulletin No: 09-010/16 Last Issued: 02/17/2016   BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red beside the change bars. Previous TSBs: Date(s) Issued: 09-009/15 02/27/15 09-004/14 01/14/14 09-011/12 03/12/12 09-036/09 07/17/09, 07/27/09 and 11/12/09 09-004/05 02/18/05 09/23/05 09-015/04 04/26/04 and 05/14/04 … Read more

Rattle Noise from Rear of Vehicle While Driving – 2004-2016 Mazda

2016 Mazda6

MTI1032 Multi-model Rattle noise from rear of vehicle while driving Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack. If the jack is not secured properly, a rattle type noise may occur while … Read more

Heater System Operating Tips – 2004-2016 Mazda

2016 Mazda6

MTI1034   Multi-Model (Equipped with Manual HVAC) Heater SYSTEM OPERATING TIPS   This article provides HVAC heater/defroster operating tips using Mode selector dial.  This includes the use of intermediate positions .   Operating Tips For Manual HVAC To warm-up foot area quickly, you first need to consider if the windshield is fogged. Some customers set … Read more

Replacement Engine Assembly Failure – 2007-2017 Mazda

2017 Mazda6

Replacement Engine Assembly Failure 1080M MTI1080 If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely. Metallic debris from the old engine (with catastrophic internal mechanical failure) may … Read more