Rattle Noise from Rear of Vehicle While Driving – 2004-2016 Mazda

“This site contains affiliate links for which OEMDTC may be compensated”



Rattle noise from rear of vehicle while driving

Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads.

This may be caused by a loose spare tire jack.

If the jack is not secured properly, a rattle type noise may occur while driving.


Secure the Jack

1. Turn the jack screw fully counter clockwise. Install the jack and wing bolt. (do not tighten wing bolt).
2. Turn the jack screw clockwise until the jack is stopped by the wing bolt.
3. Tighten the wing bolt.

Secure the Jack

MAZDA CX-3 2016
MAZDA CX-5 2013-2016
MAZDA CX-7 2007-2012
MAZDA CX-9 2007-2016
MAZDA MAZDA2 2011-2016
MAZDA MAZDA3 2007-2016
MAZDA MAZDA5 2007-2015
MAZDA MAZDA6 2007-2016
MAZDA MX-5 2007-2016
MAZDA RX-8 2004-2011





Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [914.44 KB]



Bestseller No. 1
DNA MOTORING TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black
  • HIGH-QUALITY DNA TOOLS - Each item in our collection is the result of significant research and development, as well as rigorous automotive application testing and fitments carried out by our highly qualified specialists. We test the material's strength and durability to guarantee that the tools arrive completely prepared for their intended use at the consumer's end.
  • SPEEDY LIFT GARAGE JACK - This Hydraulic Trolley Jack features a 2 ton (4,000 lb) capacity with a min lifting height of 5.1" and a max height of 13". Allows you to easily lift the jack up to desired height, Great for garage service and heavy-duty industrial use.
  • OVERLOAD PROTECTION & EASY JACK POSITIONING - Built-in dependable safety release valve triggers in the event of an overload to prevent damage or injury. The large saddle provides extra stability and helps protect your vehicle.
  • LIGHTWEIGHT DESIGN & HEAVY DUTY PERFORMANCE - Heavy duty steel construction provides rigidity and stability. Designed with swivel casters, rolling without a hitch for letting you maneuver with ease and easy positioning.
  • NOTE - The Jack is designed for lifting purposes only. lt must not be used as a jack stand to hold load for any prolonged period. It only suitable for vertiçallifting jobs and can not be used where side or downward force is required.
SaleBestseller No. 2
BIG RED T10152 Torin Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity, Red
  • Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
  • Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
  • Engineered using a drop forged alloyed steel construction for quality and durability
  • Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
SaleBestseller No. 3
Jack Boss Floor Jack 1.5 Ton (3,300 LBs) Hydraulic Car Jack with Storage Case, Lifting Range from 5.31 Inch to 13.2 Inch, Fits Sedans Automotive
  • Specifications: 1.5 ton (3,300 LBs) capacity with lifting range from 5.31" to 13.2". Of 18.31" x 7.68" x 5.31" product size. Contains 1 x floor jack, 1 x handle, 1 x storage case.
  • Stability: Adopts a thick drop forged alloyed welded steel construction. While considering aesthetics, it provides a long-term and stable usage period and is resistant to deformation and corrosion.
  • Security: Built-in safety valve will be automatically activated when it is overloaded to keep the jack from being damaged. Padded handle provides protection and comfort for user when lifting the jack.
  • Portability: Coming with A portable carrying hard blow mold case for easy storage. Fit for vehicle, garage, warehouse and more.
  • Flexibility: Equipped with 360-degree flexible swivel casters and rotating saddle, providing a smooth usage experience.
Bestseller No. 4
Amazon Basics Steel Jack Auto Stands, 3 Ton Capacity, 1 Pair, Black and Red
  • Pair of 3-ton jack stands with 6,000-pound capacity
  • Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment
  • Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use
  • Durable steel frame with rustproof coating; easy-to-read weight capacity
  • Backed by an Amazon Basics limited 1-year warranty
Bestseller No. 5
Car Jack Kit Scissor Jack for Car 2 Ton (4409 lbs) Tire Jack Tool Kit Universal Car Emergency Kit with Lug Wrench Tire Changing Kit for Car SUV MPV
  • 【Car Jack Capacity】Maximum lifting weight 2 Ton (4409 lbs),This Jack for Car Lifting Range from 4.33" (11cm) to 15.75"(40cm). The scissor lift jack provides a wider range to reach under low chassis sedans or elevate high-body SUVs effortlessly.
  • 【Complete Tire Replacement Kit】1x 2T Scissor jack; 1x Ratchet Wrench; 1x Lug Wrench(17/19mm 21/23mm); 1x Gloves; 1x Pencil Tire Pressure Gauge; 1x Storage Bag.he all-inclusive kit fits perfectly in your trunk or garage, ready to tackle any emergency tire replacement job.
  • 【Stable and Secure】The car jack kit is made from high-quality materials and is designed to withstand heavy use. Its corrosion-resistant construction guarantees durability and longevity, making it suitable for any weather conditions.
  • 【Easy to Use】The scissor jack has a simple and easy-to-operate design, while the lug wrench and tire changing kit are designed to provide a comfortable grip and maximum leverage.For any emergency, this Car Jack Kit will help you change your tire fast and easy.
  • 【Universal Car Emergency Kit】This car jack kit is universally compatible with cars, SUVs, MPVs, and other vehicles. It is perfect for emergency situations where you need to change a flat tire, remove a stuck wheel, or perform other vehicle repairs.
Bestseller No. 6
BIG RED 2.5 Ton (5,000 lb) Low Profile Hydraulic Trolly Jack, Blue, AT825051UR
  • 【Wide Application Range】Ultra low profile with a minimum lift height of 3-1/3 inch, while a maximum height of 15 inch.Widely applied in low profiled racing cars,normal cars, and SUVs.
  • 【Quality Design】Built-in safety valve provides overload protection. Rust Resistant
  • 【Safety Guarantee】Safety bypass system prevents over-loading and ensures safe operation.
  • 【Long Term Durability】Heavy duty steel construction provides long term durability with an industrial luster.
  • 【Easy Operation】 Large Steel casters and swivel casters for easy maneuverability
SaleBestseller No. 7
BIG RED Torin Hydraulic Trolley Floor Jack Combo with 2 Jack Stands, 2 Ton Capacity (T82001)
  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most cars; Constructed with heavy duty steel, providing long term durability
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation; built-in carrying handle allows the floor jack to be lifted quickly for ultimate portability
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity; Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
Bestseller No. 8
BIG RED T820014S Torin Hydraulic Trolley Service/Floor Jack with Blow Mold Carrying Storage Case, 1.5 Ton (3,000 lb) Capacity, Red
  • Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster
  • Features a 1.5 ton (3,000 lbs) capacity with a minimum lifting height of 5-3/5" and a maximum height of 13"; Ideal for most cars, trucks, and SUVs
  • Safety bypass system prevents over-loading and ensures safe operation
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability
  • Includes a plastic blow mold carrying case for easy storage when not in use; Includes a 1 year limited manufacturer warranty
SaleBestseller No. 9
BIG RED T43202 Torin Heavy Duty Steel Jack Stands: 3 Ton (6,000 lb) Capacity Car Lifting Stand,1 Pair (Not Suitable for SUV,Truck)
  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • This car jack stand is constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles
  • The pair of jacks for car has adjustable height ranging from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity
  • Multi-position ratchet bar of this 3 ton car stand has a sawtooth design, allowing for quick height adjustments that lock into place
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards. Double locking pawl and tooth design for extra protection
SaleBestseller No. 10
BIG RED T815016L Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 1.5 Ton (3,000 lb) Capacity, Blue, T815016L
  • Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity
  • Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle
  • Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles
  • Foam bumper on the handle helps protect your vehicle from damage

Last update on 2024-05-10 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...