MultiModel Active Driving Display (ADDisp) Service Caution 1096M MTI1096 If the Active Driving Display (ADDisp) unit requires removal, use caution when disconnecting/connecting the wiring harness. If the harness is not connected properly, the ADDisp may not operate. Removal While pressing the tabs in the direction of arrows (1) as shown below, pull … Read more
Subject: CRACKS AROUND EDGE OF ACTIVE DRIVING DISPLAY (LOOKS FUZZY) Bulletin No: 09-020/16 Last Issued: 03/29/2016 BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside the change bars. Previously issued TSBs: Date issued: 09-037/15 09/22/2015 APPLICABLE MODEL(S)/VINS 2016 Mazda2 Mexico built vehicles with VINs … Read more
2014-2015 MAZDA3 – ACTIVE DRIVING DISPLAY VIBRATES AND/OR CANNOT BE ADJUSTED TO A VIEWABLE POSITION APPLICABLE MODEL(S)/VINS 2014-2015 Mazda3 vehicles with VINS lower than JM1BM******218352 (produced before July 1, 2014) Active Driving Display (A) vibrates when driving over a bump and/or cannot be adjusted to a viewable position using the commander switch. This … Read more