“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 17V745
Manufacturer Mazda North American Operations
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 144
Incorrect Valve Spring may cause Engine Stall
An engine stall can increase the risk of a crash.
Summary
Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3 vehicles, equipped with an incorrect exhaust valve spring. The incorrect exhaust valve spring may fail while driving, potentially causing an engine stall.
Remedy
Mazda will notify owners, and dealers will inspect the engines and replace any incorrect exhaust valve springs, free of charge. The recall is expected to begin January 20, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda’s number for this recall is 1717K.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Mazda has a Recall
November 22, 2017
Attention: Mazda General Managers, Parts and Service Managers
Subject: 2018 Mazda3 Exhaust Valve Spring Concern Safety Recall 1717K
On November 22, 2017, Mazda Motor Corporation decided to conduct a Safety Recall Campaign to address a concern with 2018 Mexico Built Mazda3 vehicles equipped with a 2.0L engine.
Concern Outline:
Certain subject vehicles may be equipped with cylinder head exhaust valve spring(s) with an incorrect specification. The incorrect spring is smaller than specified part. If the vehicle is used with the wrong valve spring(s), the valve spring(s) may break, and in the worst case could result in an engine stall.
There are a total of 144 vehicles involved in this campaign, and the number of affected exhaust valve springs is only 6.
Affected Vehicles:
Model | Subject VIN range | Subject build date range |
2018 MY Mazda3 equipped with a 2.0L engine | 3MZ BN**** JM 178705 – 181283 | From October 6, 2017 through October 13, 2017 |
Action Required:
Beginning today, some 2018 Mazda3 vehicles equipped with a 2.0L engine must not be delivered to customers until the recall inspection and/or repair is completed. The inspection procedure will be posted on MGSS today. It is expected that almost all vehicles will only require an inspection. There are only 144 vehicles affected by this recall.
Use MGSS to pull your affected vehicle list. eMDCS should display this recall by on or before Monday 11/27/2017. Any affected vehicle will display 1717K in “Not Launched” status. “Not Launched” means that customer notification has not gone out, but the inspection and repair can still be performed and the recall closed. Once the inspection/repair is completed, the vehicle can be delivered.
Customer Notification:
All Mazda owners of affected vehicles will be notified by January 20, 2018.
Important Safety Notice: The National Traffic and Motor Vehicle Safety Act prohibits the delivery of any subject vehicle without performing the necessary repair for defects or failures. Failure to perform applicable recalls before delivery can result in extensive dealer fines and penalties from the Federal Government. Therefore, you must complete this recall for all affected vehicles in your inventory prior to delivery.
Additional details, including customer notification, parts and warranty information, and repair instructions, will be provided as soon as they are available on MGSS for your reference.
We apologize for any inconvenience this recall may cause your dealership and your customers.
Your understanding and support in carrying out this safety recall are greatly appreciated.
Because Driving Matters, Safety Matters. Your safety is important to Mazda.
Mazda Technical Services
https://static.nhtsa.gov/odi/rcl/2017/RCRIT-17V745-0577.pdf
PARTS AND WARRANTY INFORMATION
https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V745-4399.pdf
November 22, 2017
https://static.nhtsa.gov/odi/rcl/2017/RCMN-17V745-9611.pdf
December 11, 2017
https://static.nhtsa.gov/odi/rcl/2017/RCAK-17V745-2900.pdf
- Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Helps protect critical engine parts for up to 10,000 miles between oil changesm,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Provides better fuel economy (based on the latest industry standards)
- Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- Superior wear protection on critical engine parts
- 6X better wear protection than industry standards, as measured in the latest Sequence IVA test
- Superior sludge cleaning and protection against new formation
- 1.3X better sludge protection than industry standards, as measured in Sequence VH sludge test vs. API SP limits
- Full synthetic formula provides thermal and oxidation stability
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- 3X stronger against viscosity breakdown than leading full synthetic, based on Kurt Orbahn test in 5W-30 grade
- 10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
- 6X better wear protection, Protection for 10,000 miles between oil changes
- 1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
- Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection
- Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
- Full synthetic 0W-20 engine oil designed for vehicles with over 70,000 miles that offers the same protection as SAE 5W-20 and is made with natural gas
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
- Formulated to deliver less oil burn off than high mileage motor oils made from crude oil
- Mobil 1 Truck & SUV advanced full-synthetic motor oil 0W-20 is specially formulated for hardworking trucks and SUVs that operate in tough conditions like towing and hauling.
- Helps protect critical engine parts for up to 10,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine protection, cleanliness, and proven performance in a 10,000 lb. towing test**
- Additives that help prevent deposit formation
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Better wear protection
- Increased fuel efficiency
- Better protection of the expensive catalytic emission system
- Improved compatibility with fuels containing ethanol
- Superior corrosion protection
Last update on 2024-04-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.