Mazda

Check Engine Light On with a P0101 and/or P0102 Possible Start-Stall Condition – ALL SKYACTIV ENGINES

by

ALL SKYACTIV ENGINES – CHECK ENGINE LIGHT ON WITH P0101 AND P0102 It was discussed on the monthly Tech Tips Call that dealers are seeing a number of vehicles with the following symptoms: Check Engine Light On with a P0101 and/or P0102 and/or a possible start- stall condition.   The Mass Airflow Sensor (MAF) appears … Read more

Mazda Connect Reboots Constantly – 2015-2016 Mazda

by

MAZDA CONNECT REBOOTS CONSTANTLY If you encounter a customer concern of a MAZDA CONNECT system constantly rebooting on 2015 or 2016 MazdaeBay, perform the following steps:     [easyazon_infoblock align=”center” identifier=”B01MZ25DNT” locale=”US” tag=”mazdaoemdtc-20″] [easyazon_infoblock align=”center” identifier=”B00RVGZRR2″ locale=”US” tag=”mazdaoemdtc-20″] [easyazon_infoblock align=”center” identifier=”B002OL2MU4″ locale=”US” tag=”mazdaoemdtc-20″]

Convertible Top Contacts Rear of Driver’s Headrest – 2016 Mazda MX-5

by

2016 MX-5 CONVERTIBLE TOP CONTACTS REAR OF DRIVER’S HEADREST WHEN LOWERING On brand new MX-5’s, the convertible top may contact the rear of the seat back bar garnish if the top is not lowered correctly.   Once the top is lowered / raised many times and the top fabric loosens up, this issue will go … Read more

Creak Noise From Rear – 2016 Mazda MX-5

by

2016 MX-5 – Creak Noise From Rear of Vehicle When Accelerating From a Stop   Noise may be caused by loose differential Power Plant Frame.   Tighten the 4 nuts located at the rear of the Power Plate Frame to the maximum specification. Maximum Tightening torque: 120 ft·lbf {16 kgf·m, 164 N·m}   Creak Noise … Read more

Driver-Side Power Door Mirror Vibration – 2013-2015 Mazda CX-5

by

2013-2015 CX-5 – DRIVER-SIDE POWER DOOR MIRROR VIBRATION APPLICABLE MODEL(S)/VINS 2013-2015 CX-5 vehicles with VINs lower than JM3KE******465579 (produced before April 1, 2014)   Vibration from the driver-side power door mirror glass when the vehicle is driven at high speeds.   This concern may be due to a lack of rigidity of the mirror base … Read more