2015 Mazda3 iSport and iTouring – Do Not Come with Navigation or SiriusXM Radio

2015 Mazda3 iSport and iTouring come with the MAZDA CONNECT Infotainment System, but are NOT equipped with Navigation or SIRIUS XM Radio.   They will have a slot for a NAVI SD Card, but will not have a NAVI SD Card inside the vehicle.   A DEALER INSTALLED Navigation System is available as an accessory … Read more

Ignition will not Fully Turn Off when Start/Stop Button is Pressed – 2013-2015 Mazda

2013-2015 MazdaeBay CX-5, 2014-2015 Mazda3 & Mazda6 Vehicles, the engine will turn off when the start/stop button is pressed, however the ignition will not fully turn off and will go to the accessory mode.   Ask the customer if they normally hang anything from the shifter, such as a bag or purse. This could cause the … Read more

Lack of Power During Hard Acceleration in Cold Weather – 2013-2016 Mazda

2016 Mazda CX-5

 Subject: LACK OF POWER DURING HARD ACCELERATION IN COLD WEATHER Bulletin No: 01-011/15 Last Issued: 06/17/2015   BULLETIN NOTE   APPLICABLE MODEL(S)/VINS 2014-2015 Mazda3 2.0L with VINs lower than JM1BM******267077 (produced before March 30, 2015 – Japan built) 2014-2015 Mazda3 2.0L with VINs lower than 3MZBM****** 207478 (produced before April 1, 2015 – Mexico built) 2013-2016 CX-5 … Read more

Audio, Navigation and Phone Concerns with Mazda Connect Infotainment System – 2014-2019 Mazda

2016 Mazda6

NHTSA ID Number: 10162014 Manufacturer Communication Number: 09-022-19-3599   Summary Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 70.00.335C or later). NOTE:For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of MazdaeBay’s continuing efforts to … Read more

Power Window System Initialization Procedure – 2006-2016 Mazda

POWER WINDOW SYSTEM INITIALIZATION PROCEDURE NOTE: If the following operations have been performed, initial setting is reset, and auto up/down and two-step down operation are disabled. Therefore, performing initial setting is necessary.   The driver-side power window initialization procedure can be performed only using the power window main switch. The passenger-side power window initialization procedure … Read more