Mazda5

Passenger Airbag Deactivation (PAD) Indicator Illumination – 2004-2016 Mazda

by

MULTI-MODEL – PASSENGER AIRBAG DEACTIVATION (PAD) INDICATOR LIGHT ILLUMINATION APPLICABLE MODEL(S)/VINS 2016 CX-3 2011-2016 Mazda2 2004-2016 Mazda6 2004-2006 MPV 2013-2016 CX-5 2004-2016 Mazda3 2004-2005 Miata 2007-2012 CX-7 2006-2010 Mazda5 2006-2016 MX-5 2007-2016 CX-9 2012-2016 Mazda5 2006-2011 RX-8   This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service. … Read more

Automatic Transmission Fluid ATF – 2000-2016 Mazda

by

NHTSA ID Number: 10100890 Manufacturer Communication Number: 05-001-16-3128 Summary ALWAYS BE SURE TO USE THE CORRECT AUTOMATIC TRANSMISSION FLUID WHEN REPLACING ATF. USING THE WRONG ATF MAY CAUSE SHIFT QUALITY COMPLAINTS OR MAY EVEN DAMAGE THE TRANSMISSION.NOTE:• ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCON®LV ATF.• ATF M-V (TYPE M5) HAS A … Read more

Fuel Filler Lid will not Open or Close – 2011-2016 Mazda

by
2016 Mazda CX-5

Subject: FUEL FILLER LID DOES NOT OPEN OR CLOSE Bulletin No: 09-029/15 Last Issued: 08/04/2015   APPLICABLE MODEL(S)/VINS 2011-2014 Mazda2 2012-2015 Mazda5 vehicles with VINs lower than JM1CW******191244 (produced before June 2, 2015) 2013-2016 CX-5 vehicles with VINs lower than JM3KE******668045 (produced before May 20, 2015)   DESCRIPTION On some vehicles, the fuel filler lid will not … Read more

Fuel Tank is Difficult to Fill – 2010-2015 Mazda

by

2010-2013 MAZDA3 AND 2012-2015 MAZDA5 – FUEL TANK IS DIFFICULT TO FILL APPLICABLE MODEL(S)/VINS 2010-2013 Mazda3 (including Mazdaspeed3) 2012-2015 Mazda5 vehicles with VINs lower than JM1CW******176622 (produced before June 2, 2014)   Fuel tank is difficult to fill up.   This concern may be caused by improper operation of the non-return valve in the fuel … Read more

Power Window System Initialization Procedure – 2006-2016 Mazda

by

POWER WINDOW SYSTEM INITIALIZATION PROCEDURE NOTE: If the following operations have been performed, initial setting is reset, and auto up/down and two-step down operation are disabled. Therefore, performing initial setting is necessary.   The driver-side power window initialization procedure can be performed only using the power window main switch. The passenger-side power window initialization procedure … Read more