Check Engine Light with DTC P0300-P0304 – 2013-2016 Mazda

2016 Mazda6

Subject: CHECK ENGINE LIGHT ON WITH DTC P0300-P0304 Bulletin No: 01-014/16 Last Issued: 07/29/2016   BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red beside the change bars. Previously Issued TSBs: Date(s) Issued 01-014/16 06/10/16   APPLICABLE MODEL(S)/VINS 2013-2016 CX-5 vehicles with VINs lower than JM3KE******802960 (produced before …

Read more

Engine Runs Rough DTCs (P0301, P0302, P0303, P0304) – 2013-2016 Mazda

2016 Mazda6

 Subject: ENGINE RUNS ROUGH AND CHECK ENGINE LIGHT ON WITH DTCS P0201 AND P0204 OR P0202 AND P0203 Bulletin No: 01-017/16 Last Issued: 08/26/2016   APPLICABLE MODEL(S)/VINS 2013-16 CX-5 vehicles (Japan built) with VINs lower than JM3KE******820183 (produced before May 23, 2016) 2014-16 Mazda3 vehicles (Japan built) with VINs lower than JM1BM******352403 (produced before May 23, 2016) …

Read more

Replacement Engine Assembly Failure – 2007-2017 Mazda

2017 Mazda6

Replacement Engine Assembly Failure 1080M MTI1080 If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely. Metallic debris from the old engine (with catastrophic internal mechanical failure) may …

Read more

Water Pump Coolant Leak – 2003-2017 Mazda

2017 Mazda6

 Subject: WATER PUMP COOLANT LEAK Bulletin No: 01-016/16 Last Issued: 08/26/2016   BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside the change bars. Previously issued TSBs: Date issued: 01-004/09 02/03/2009   APPLICABLE MODEL(S)/VINS 2004-2017 Mazda3 2016-2017 Mazda CX-3 2007-2017 Mazda CX-9 2006-2015 Mazda5 2013-2017 Mazda

Read more

Vehicle Control Module Reprogramming – 2004-2017 Mazda

2017 Mazda6

VEHICLE CONTROL MODULE REPROGRAMMING MTI1099 1099M When reprogramming a control module, always use the GR-8 battery management system Power Supply Mode. If not used, the control module reprogramming may fail due to a weak vehicle battery. The GR-8 battery management system Power Supply Mode prevents the vehicle battery from being discharged. This allows the IDS …

Read more