Stains Found On Paint During PDI – 2014-2016 Mazda

2016 Mazda6

Subject: STAINS FOUND ON PAINT DURING PDI Bulletin No: 09-010/16 Last Issued: 02/17/2016   BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red beside the change bars. Previous TSBs: Date(s) Issued: 09-009/15 02/27/15 09-004/14 01/14/14 09-011/12 03/12/12 09-036/09 07/17/09, 07/27/09 and 11/12/09 09-004/05 02/18/05 09/23/05 09-015/04 04/26/04 and 05/14/04 … Read more

Rattle Noise from Rear of Vehicle While Driving – 2004-2016 Mazda

2016 Mazda6

MTI1032 Multi-model Rattle noise from rear of vehicle while driving Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack. If the jack is not secured properly, a rattle type noise may occur while … Read more

Heater System Operating Tips – 2004-2016 Mazda

2016 Mazda6

MTI1034   Multi-Model (Equipped with Manual HVAC) Heater SYSTEM OPERATING TIPS   This article provides HVAC heater/defroster operating tips using Mode selector dial.  This includes the use of intermediate positions .   Operating Tips For Manual HVAC To warm-up foot area quickly, you first need to consider if the windshield is fogged. Some customers set … Read more

Active Driving Display Caution – 2014-2016 Mazda

2016 Mazda6

MTI1036 Multi-model – (with active driving display) Active Driving Display Caution (Update)   Some customers may claim that it is impossible or difficult to view the Active Driving Display, even if the position of the display is adjusted through the Settings screen. This is caused by an incorrectly learned zero-point (closed position) of the Active … Read more

Mazda Mobile Start (MMS) Cannot Communicate with Vehicle – 2016 Mazda

2016 Mazda6

SA266   Tittle MAZDA MOBILE START (MMS)  CANNOT COMMUNICATE WITH VEHICLE   Content If a customer has a vehicle communication related error on their APP,  perform the following: Disconnect the battery or unplug the module for at least 10 seconds. Reconnect the battery, wait 60 seconds and then have the customer try the APP again, … Read more