| “This site contains affiliate links for which OEMDTC may be compensated” |
2013-2016 CX-5 – RATTLE / VIBRATION NOISE AT 35-40 MPH
Rattle or buzz noise from the engine compartment when driving at 35-40 mph (approx. 1,800 rpm in 4th or 5th gear).
The noise may be caused by loose front grille upper panel screws (4) or missing plastic fasteners (2).
- Inspect the front grille upper panel screws (4) for looseness. If any of the screws are loose, re-tighten them to the proper specification:
Tightening Torque: 61 in-lbf (6.9 Nm, 70 kgf-cm)
- Remove the seal board upper cover and check for missing fasteners (2). Install plastic fasteners if missing.
Note: Fasteners may not have been reinstalled during a previous repair.
Bestseller No. 1
Rexka 30pcs Splash Shield Fender Liner Rocker Molding Retainer Clips Rivet for Mazda B09251833 Mazda 3 Mazda 6 Mazda 2 CX-5 CX-9 Speed6 Miata RX-8 Ford W705845-S300 Fusion Escape Focus
- Other Names:Rocker Molding Rivet, Splash Shield Rivet, Rocker Molding Fastener, Mud Guard Rivet, Under Cover Rivet, Fender Liner Rear Clip, Lower Molding Rivet, Fender Liner Rivet, Pipe Shield Rivet, Splash Shield Clip, Lever Assembly Rivet, Headlamp Rivet, Stone Guard Rivet, Headlamp Assembly Clip, Deflector Rivet, Support Clip, Support Retainer Clip, Headlamp Clip, Headlamp Housing Rivet, Molding Rivet, Rear Cover Rivet, Bumper Cover Rivet, Headlamp Assembly Retainer, Rivet
- Head Diameter: 18mm Stem Length: 12mm Fits Into 8mm Hole
- Replaces Mazda: B092-51-833, Fits Mazda 2, Mazda 3, Mazda 5, Mazda 6, Mazda 626, Mazda CX-3, Mazda CX-30, Mazda CX-5, Mazda CX-7, Mazda CX-9, Mazda Millenia, Mazda MPV, Mazda MX-5 Miata, Mazda Protege, Mazda Protege5, Mazda RX-8
- Meet or Exceed OEM Specification
- Included with: Grille assembly, Mud guard, Rear cover, Spoiler, Upper grille.
SaleBestseller No. 2
GOOACC - GRC-34 Push Bumper Fastener Rivet Clips with 18 Most Popular Sizes Auto Push Pin Rivets for Benz, BMW, Toyota, Honda, Subaru, Nissan, Mazda etc
- 18 MOST COMMON SIZE: GOOACC push retainer Clips are suitable for Mercedes Benz, BMW, TOYOTA, Honda, Subaru, NISSAN, Mazda, Lancer for exact replacement.Not Only for the cars we mention, if the sizes and shape meet your requirement, it also works well
- WIDELY APPLICATION:Theses push clips are widely used for car body clips, trim panel retainer, door trim fastener, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- BONUS AUTO FASTENER REMOVER - Allow you to quickly and easily remove car door panel trim clips and upholstery clips without causing damage to them. Easy access into confined areas.
- PREMIUM QUALITY RETAINER ASSORTMENT: GOOACC push rivets are made of heavy-duty plastic&nylon, which is strong, robust and vibration resistant, would not break or crack easily.
- NOTE: GOOACC offers clear pictures for your reference, please check the size, type and shape to make sure the item is the one that you need.If you there is any issue after sale such as inappropriate size& shape, please email us directly, we will offer 100% satisfactory service.
Bestseller No. 3
Rexka 30pcs Bumper Cover Fender Liner Splash Shield Push Type Retainer Clip BGV4-56-145 for Mazda 2, Mazda 3, Mazda 6, CX-3, CX-30, CX-5, CX-9, MX-5 Miata BGV456145
- Other Names:Cowl Grille Clip, Under Cover Clip, Seal Plate Clip, Cowl Grille Fastener, Resonator Rivet, Access Cover Retainer Clip, Center Grille Clip, Access Cover Clip, Plate Clip, Rocker Molding Clip, Cowl Grille Protector, Front Shield Retainer, Guard Clip, Pipe Shield Clip, Side Plate Clip, Air Deflector Clip, Air Duct Clip, End Cover Clip, Mud Guard Retainer, Outer Grille Clip, Rear Seal Clip, Wheel Opening Molding Clip, Wheel Open
- Other Names:End Plate Rivet, Filler Clip, Pillar Molding Clip, Resonator Clip, Splash Shield Rivet, Carrier Clip, Sight Shield Clip, Bumper Cover Rivet, Plate Retainer, Rocker Molding Rivet, Shield Clip, Clip
- Replaces Mazda BGV4-56-145 Mazda 2, 3, 6, CX-9 and Miata 2010-On
- Black Nylon,Head Diameter: 20mm Stem Length: 14mm Fits Into 8mm Hole
- Notes: Included With Stiffener. Included With Under Cover. Included With Splash Shield.
Bestseller No. 4
Rexka 20pcs Splash Shield Fender Liner Bumper Cover Retainer Clip BC1D56145 for Mazda 2 Mazda 3 Mazda 5 Mazda 6 626 CX-5 CX-7 CX-9 Miata MPV MX-5 Miata Protege Protege5 RX-8
- Other Names:Splash Shield Clip, Fender Liner Clip, Under Cover Clip, Air Deflector Clip, Air Duct Clip, End Cover Clip, Cowl Grille Retainer Clip, Protector Clip, Carrier Clip, Cowl Grille Fastener, Pipe Shield Clip, Cover Plate Clip, Duct Assembly Clip, Fender Liner Fastener, Side Molding Retainer Clip, Bumper Cover Clip, Bumper Cover Fastener, Protector Retainer, Retainer, Shield Clip, Upper Cover Clip, Splash Guard Clip, Deflector Shield Clip, Under Cover Rivet, Wheelhouse Liner Clip
- Other Names: Center Grille Clip, Fender Liner Retainer, Mud Guard Retainer, Outer Grille Clip, Rear Seal Clip, Rear Seal Retainer, Retainer Plate Clip, Wheel Opening Molding Clip, Wheel Opening Molding Retainer, Sight Shield Fastener, Spoiler Assembly Clip, Plate Clip, Sight Shield Clip, Air Guide Clip, Clip
- Replaces Mazda: BC1D-56-145, Fits 1998-2002 Mazda 626, 2013-2015 Mazda CX-5, 2007-2012 Mazda CX-7, 2007-2015 Mazda CX-9, 2011-2015 Mazda 2, 2004-2013 Mazda 3, 2006-2015 Mazda 5, 2003-2012 Mazda 6, 1998-2005 Mazda Miata, 1995-2003 Mazda Millenia, 1999-2006 MAZDA MPV, 2006-2015 Mazda MX-5 Miata, 1993-1997 MAZDA MX-6, 1996-on Mazda Protege, 2005-2012 Mazda RX-8
- Black Nylon,Head Diameter: 20mm Stem Length: (Excluding. Pin): 9mm Fits Into 8mm Hole
- Positions:Left Front, Left Upper, Left Outer, Left Rear, Right Front, Right Upper, Right Outer, Right Rear
Bestseller No. 5
GOOACC 190 Pcs Car Retainer Clips & Fastener Remover - 18 Most Popular Sizes & Applications Auto Push Pin Rivets Set -Door Trim Panel Clips for Toyota, Honda, Nissan, Mazda - Bonus Fastener Remover
- 【MADE Of DURABLE NYLON】- Our plastic fastener auto clips perfect fit your parts very tightly，which is strong, robust and vibration resistant, would not break or crack easily.
- 【18 MOST COMMON SIZES】- Our auto Puch Type Retainer 190PCS Kit are available in 18 different sizes.Perfect replacement for broken retainers.Can meet the various needs of your car!
- 【SAVE YOUR TIME】- No need to go to a auto parts store and look for different fasteners.And comes with a plastic box with 18 compartments for organized storage.You can find it easily.
- 【TOUGH FASTENER REMOVER】- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.
- 【WIDE APPLICATION】- Professional push clips are widely used for car panel, door trim, bumper and fender for Toyota Honda Nissan Mazda etc. Please feel free to contact us if there's any issue, we'll provide 100% satisfactory service.
Bestseller No. 6
30pcs Bumper Engine Cover Fender Splash Shield Push-Type Retainer Clip Compatible with Mazda 3 5 6 CX-3 CX-5 CX-9 MX-5 Miata B45A-56-146A Toyota Scion 90118-WB048
- OEM Replacement Part Numbers: 90118-WB048, B45A-56-146A, Please check the model of your car before ordering.
- Product Size: Top head diameter: 11.5mm, Bottom head diameter: 20mm, Stem length: 13mm, Fits into 8mm hole.
- High Quality: These push-type retainer clips are made of durable plastic material to ensure long-term use, Not easy to break or crack during use, Ideal for you.
- Compatible With Fits Mazda 32017-202; Mazda 62016-202; Mazda CX-32016-202; Mazda CX-302020-202; Mazda CX-52013-2021; Mazda CX-92016- 202; Mazda MX-5 Miata2016- 2021; Scion iA 2016; 2019-2020 Toyota Yaris; 2017-2018 Toyota Yaris iA.
- The Package Includes: 30pcs Push-Type Retainer Clip in the package. Bumper Cover Fastener, Splash Shield Rivet, Retainer Fastener, Mount Bracket Fastener.
Bestseller No. 7
Rexka 30pcs Splash Shield Grille Bumper Cover Retainer Clip Fastener Rivet for Mazda GD7A-50-EA1 GD7A50EA1 Mazda 3 Mazda 6 Mazda 2 5 CX-3 CX-30 CX-5 CX-50 CX-7 CX-9 MPV MX-5 Miata Protege RX-8
- Other Names:Carrier Fastener, Carrier Assembly Fastener, Carrier Clip, Seal Fastener, Front Shield Fastener, Seal Plate Fastener, Liner Extension Clip, Air Guide Clip, Sight Shield Clip, Under Cover Retainer, Air Guide Fastener, Hole Cover Fastener, Lower Shield Fastener, Mount Bracket Fastener, Lock Support Fastener, Lower Shield Clip, Spoiler Retainer, Support Plate Fastener, Air Inlet Fastener, Air Inlet Panel Fastener, Baffle Plate Fastener, Closure Panel Fastener, Filler Plate Fastener
- Other Names:Upper Bracket Fastener, Grille Fastener, Reinforcement Fastener, Trim Panel Fastener, Grille Assembly Retainer Clip, Air Deflector Fastener, Front Spoiler Clip, Headlamp Fastener, Liner Extension Fastener, Lower Grille Fastener, Mount Plate Fastener, Plate Retainer Clip, Sight Shield Fastener, Guard Fastener, Shroud Fastener, Bumper Cover Bolt, Grille Assembly Fastener, Retainer, Spoiler Assembly Screw, Lower Support Fastener, Bumper Guard Fastener, Skirt Fastener
- Replaces Mazda: GD7A50EA1, Fits Mazda CX-3, CX-5, CX-7, CX-9, Mazda 2, Mazda 3, Mazda 5, Mazda 6, Mazda Speed6, Miata, Millenia, MPV, MX-5 Miata, Protege, Protege 5, RX-8
- Black Nylon,Head Diameter: 19.5mm Stem Length: 15mm Fits Into 10mm Hole
- Included with: Air baffle, Center Cover, Front Cover, Panel assembly, Reinforcement, Screen, Under Cover, Upper Grille.
Bestseller No. 8
Rexka 25pcs Wheel Opening Molding Retainer Clip KB8A-51-W24A Compatible with Mazda 3, CX-30, CX-5
- Meet or Exceed OEM Specification
- Other Names:Upper Molding Fastener, Lower Molding Fastener, Rear Spoiler Clip, Center Bracket Fastener, Rear Spoiler Fastener, Side Spoiler Fastener, Spoiler Assembly Fastener, Fastene
- Replaces Mazda: KB8A51W24A. Fits Mazda 3 2019-2021, Mazda CX-30 2020-2021, Mazda CX-5 2017-2021
- KB8A51W24A Mazda Fastener Clip Molding Spoiler
Bestseller No. 9
SaleBestseller No. 10
GOOACC - GRC-33 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler
- UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
- SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
- HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
- MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
- EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
Last update on 2024-05-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.