Skip to content
POWER WINDOW SYSTEM INITIALIZATION PROCEDURE
If the following operations have been performed, initial setting is reset, and auto up/down and two-step down operation are disabled. Therefore, performing initial setting is necessary.
- Negative battery cable disconnected or power window system power supply fuse removed. (perform initial setting for the switches of all seats.)
- Power window switch connector disconnected. (Perform initial setting for the switch connected with the connector.)
- Prolonged open/close operation of the power window main or sub switches causes the circuit breaker to activate and automatic operation is disabled.
MULTI-MODEL – CONDENSATION / FOG IN FRONT AND REAR COMBINATION LAMPS
Condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights.
MULTI-MODEL – SIRIUSXM SATELLITE RADIO REGISTRATION TRANSFER AFTER UNIT REPLACEMENT
Vehicles equipped with SiriusXM satellite radio
When replacing the SiriusXM satellite radio unit (or a MAZDA CONNECT tuner and amp unit (TAU)) with replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as soon as possible to ensure the customer leaves with active working SAT radio.
MULTI-MODEL – CLUNK / BANG / BUZZ NOISE DURING FIRST FORWARD MOVEMENT AFTER SITTING
Slight clunk/bang/buzz noise or jolt from the front of the vehicle.
error: Content is protected !!