Subject: CRACKS AROUND EDGE OF ACTIVE DRIVING DISPLAY (LOOKS FUZZY) Bulletin No: 09-020/16 Last Issued: 03/29/2016 BULLETIN NOTE This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside the change bars. Previously issued TSBs: Date issued: 09-037/15 09/22/2015 APPLICABLE MODEL(S)/VINS 2016 Mazda2 Mexico built vehicles with VINs … Read more
2014-2016 MAZDA3 – SQUEAKING/GRINDING NOISE FROM REAR BRAKE APPLICABLE MODEL(S)/VINS 2014-2016 Mazda3 vehicles with VINs starting with JM1 Squeaking/grinding noise from the rear brake even after the brake pedal is released. Upon inspection, the caliper mounting support is corroded and one of the disc pad is abnormally worn out (A). This is caused … Read more
2010-2015 CX-9 – NOISE FROM FUEL TANK INSULATOR APPLICABLE MODEL(S)/VINS 2010-2015 CX-9 vehicles with VINs lower than JM3TB******460027 (produced before April 1, 2015) Unusual noise while driving the vehicle. The noise may be caused by a broken fuel tank (B) insulator (A) that is hanging down and contacting the propeller shaft. The rivets … Read more
MULTI-MODEL – BSM RADAR AIMING CANNOT BE PERFORMED AFTER RIGHT-SIDE BSM CONTROL MODULE REPLACEMENT APPLICABLE MODEL(S)/VINS 2016 Mazda2 2016 CX-3 2016 MX-5 If the right-side BSM control module requires replacement for any repair, also replace the left side BSM control module to complete the radar aiming procedure (it is OK to replace the left … Read more
2014-2015 MAZDA3 – CREAKING NOISE FROM ENGINE COMPARTMENT APPLICABLE MODEL(S)/VINS 2014-15 Mazda3 (Mexico built) vehicles with VINs lower than 3MZBM1U73FM142551 (produced before August 21, 2014) Creaking noise from the engine compartment when the vehicle starts moving and/or during transmission shifting. Due to production tolerances, some No. 4 engine mount rubbers were filled with … Read more
